Showing results for 
Search instead for 
Did you mean: 
New member
1 0 0 0
Message 1 of 2
Flag Post


Upgrade RAM notebook HP 250 G6

HP Recommended
HP 250 g6
Microsoft Windows 10 (64-bit)

Goodmorning everyone. I wanted to know if it's possible to upgrade the ram of this notebook from 4gb to 16gb or if it's not possible because the ram is soldered. Thank you

Level 15
Level 15
10,994 10,936 2,167 4,345
Message 2 of 2
Flag Post
HP Recommended


Yes, it is possible to upgrade RAM. It depends on what CPU is in the notebooK

So, if you have a 6th or 7th gen. Intel Core CPU you can upgrade to 16GB (2x8) of DDR4 2400MHz RAM. The RAM will run at 2133MHz.



If you have a Pentium or Celeron CPU you can upgrade to max 8GB of DDR3L 1600MHz RAM (there is one slot)


On page 45 of service manual you can see the steps to install the RAM


You should also consider upgrading to an SSD if you have a regular HDD (mechanical) in the notebook as it would give a good boost in everyday performance.


Hope it helps,


Please click on thumbs up for thanks

Please click on accept as solution if answered your question

0 Kudos
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation