Please check this document to find the workaround solution for Print and Scan - HP Solution Center doesn't open
Resolve Windows 10 or update issues on HP computer or printer– Click Here
Goodmorning everyone. I wanted to know if it's possible to upgrade the ram of this notebook from 4gb to 16gb or if it's not possible because the ram is soldered. Thank you
Go to Solution.
Yes, it is possible to upgrade RAM. It depends on what CPU is in the notebooK
So, if you have a 6th or 7th gen. Intel Core CPU you can upgrade to 16GB (2x8) of DDR4 2400MHz RAM. The RAM will run at 2133MHz.
If you have a Pentium or Celeron CPU you can upgrade to max 8GB of DDR3L 1600MHz RAM (there is one slot)
On page 45 of service manual you can see the steps to install the RAM
You should also consider upgrading to an SSD if you have a regular HDD (mechanical) in the notebook as it would give a good boost in everyday performance.
Hope it helps,
Please click on thumbs up for thanks
Please click on accept as solution if answered your question
Didn't find what you were looking for?
Ask the community