• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
Troubleshooting screen flickering issue on HP notebooks: Click here to view the instructions!
Common problems for Battery
We would like to share some of the most frequently asked questions about: Battery Reports, Hold a charge, Test and Calibrating Battery . Check out this link: Is your notebook plugged in and not charging?
Locked

‎07-31-2025 07:41 PM

HP Recommended

My laptop HP 14 inch Laptop PC 14-d3000 (2L0Z3AV), I have to replace the NVME 2.0 SSD, but I don't know the slot size, whether it is really 2280 PCIE 4.0.

How to find out without opening the cover while the laptop can't enter Windows?

1 ACCEPTED SOLUTION

Accepted Solutions

‎07-31-2025 08:18 PM

HP Recommended

I would recommend installing W11 since W10 goes out of support in 2.5 months.

 

HP has drivers for both operating systems.

 

HP 14 inch Laptop PC 14-d3000 (2L0Z3AV) Software and Driver Downloads | HP® Support

 

Your notebook support M.2 2280 NVMe SSD's and the M.2 slot is PCIe Gen 3.0.

 

A Gen 4.0 SSD will work fine, but it will not run at its maximum advertised read/write speeds from the Gen 3 slot.

 

The max transfer speed from a Gen 3.0 slot is 4,000 MBPS.

 

Below is the link to the service teardown video:

 

Removing & replacing parts for HP 14-dq0000/d6000 | HP Support

 

View solution in original post

Was this reply helpful? Yes No
1 REPLY 1

‎07-31-2025 08:18 PM

HP Recommended

I would recommend installing W11 since W10 goes out of support in 2.5 months.

 

HP has drivers for both operating systems.

 

HP 14 inch Laptop PC 14-d3000 (2L0Z3AV) Software and Driver Downloads | HP® Support

 

Your notebook support M.2 2280 NVMe SSD's and the M.2 slot is PCIe Gen 3.0.

 

A Gen 4.0 SSD will work fine, but it will not run at its maximum advertised read/write speeds from the Gen 3 slot.

 

The max transfer speed from a Gen 3.0 slot is 4,000 MBPS.

 

Below is the link to the service teardown video:

 

Removing & replacing parts for HP 14-dq0000/d6000 | HP Support

 

Was this reply helpful? Yes No
Warning
Be alert for scammers posting fake support phone numbers and/or email addresses on the community.
If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.
Didn't find what you were looking for? Ask the community
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.