-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Notebooks
- Notebook Hardware and Upgrade Questions
- can my laptop support a single 8 GB RAM

Create an account on the HP Community to personalize your profile and ask a question
11-25-2016 02:28 AM
I have a HP Pavilion g4 (HP G4-1303AU) ,I am attaching the screenshot of the memory module page from the hp online documentation (http://h10032.www1.hp.com/ctg/Manual/c03717822) .
Plesae tell me that if i put in a single 8 gb DDR3 chip ; Will it be OK and the laptop would perform as it should with a 4096*2 chip?
Solved! Go to Solution.
Accepted Solutions
11-25-2016 02:44 AM
Hi,
From its Service Guide:
Supports up to 8192 GB of system RAM DDR3/1333-MHz
Supports the following configurations:
● 8192-MB total system memory (4096×2; not supported with Windows® 7 32-bit operating system)
● 6144-MB total system memory (4096×1 + 2048×1)
● 4096-MB total system memory (4096×1 or 2048×2)
● 3072-MB total system memory (2048×1 + 1024×1)
● 2048-MB total system memory (2048×1 or 1024×2)
● 1024-MB total system memory (1024×1; not supported with Windows 7 64- or 32-bit operating system)
No, you have to put 4 GB on each slot (4GB x 2) to get benefit of dual (dual means two) channel. 8GB on one slot won't work.
Regards.
***
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
11-25-2016 02:36 AM
hi
your laptop have capacity of 8gb but i can't promise you of 8gb RAM help for better performance
Hope this helps, for any further queries reply to the post and feel free to join us again
**Click the White Thumbs Up Button on the right to say Thanks**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Thank You,
11-25-2016 02:44 AM
Hi,
From its Service Guide:
Supports up to 8192 GB of system RAM DDR3/1333-MHz
Supports the following configurations:
● 8192-MB total system memory (4096×2; not supported with Windows® 7 32-bit operating system)
● 6144-MB total system memory (4096×1 + 2048×1)
● 4096-MB total system memory (4096×1 or 2048×2)
● 3072-MB total system memory (2048×1 + 1024×1)
● 2048-MB total system memory (2048×1 or 1024×2)
● 1024-MB total system memory (1024×1; not supported with Windows 7 64- or 32-bit operating system)
No, you have to put 4 GB on each slot (4GB x 2) to get benefit of dual (dual means two) channel. 8GB on one slot won't work.
Regards.
***
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.