• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
Join the HP Community Solve‑a‑thon | Help Others & Share Your Solutions | Live on Zoom | 2:30 PM to 2:30 AM IST | Every Wednesday Click here to know more
Common problems for Battery
We would like to share some of the most frequently asked questions about: Battery Reports, Hold a charge, Test and Calibrating Battery . Check out this link: Is your notebook plugged in and not charging?
HP Recommended
HP pavilion B&O laptop
Microsoft Windows 10 (64-bit)

did a system extensive test which failed.

battery check: passed 

processor check: passed

wireless module check: passed

hard drive SMART check: failed

failure ID: MC5479-8P19HF-MFPURG-609203 

 

what does this mean, how would I go about fixing or getting repaired?

1 REPLY 1
HP Recommended

Hi:

The problem is fixable if you are willing and able to take the notebook apart.

The code reported, Hard Disk 1 SMART Hard Drive Detects Imminent Failure, means the hard drive is about to fail (if it hasn't already), needs to be replaced, and the operating system reinstalled.

If you can still get into Windows, back up any files you want to save onto a portable hard drive.

Below is the link to the service manual for your notebook. The hard drive R & R procedure can be found in chapter 5.

http://h10032.www1.hp.com/ctg/Manual/c05493193

After you replace the hard drive, you can reinstall W10 for free as follows...

You can make a W10 USB flash drive installer with the Microsoft Media Creation Tool, using an 8 GB flash drive using another Windows PC, if your PC is not working.

https://www.microsoft.com/en-us/software-download/windows10

If you are asked to enter a product key during the installation process, select the 'I don't have a product key' option, and W10 will install and automatically activate once you are connected to the internet.

Here are the steps to create the W10 USB flash drive installer...

Select Download tool now, and select Run.

If you agree to the license terms, select Accept.

On the What do you want to do? page, select Create installation media for another PC, and then select Next.

Select the language, edition, and architecture (64-bit or 32-bit) for Windows 10. You want 64 bit.

 

Select which media you want to use:

USB flash drive. Plug in a blank USB flash drive with at least 8GB of space. Any content on the flash drive will be deleted.

Then you can reinstall the drivers and available software from the PC's support page.

 

https://support.hp.com/us-en/drivers/selfservice/hp-pavilion-power-15-cb000-laptop-pc/15551388

† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.