-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center.
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center.
- HP Community
- Notebooks
- Notebook Hardware and Upgrade Questions
- Re: how to open my laptop
Create an account on the HP Community to personalize your profile and ask a question
08-03-2024 07:03 AM
Hello , ive been using HP Pavilion x360 Convertible 14-dy0xxx for a good amount of years and I wanted to upgrade the RAM, but I don't really how to disassemble my laptop. or , how do I open up the laptop.
Solved! Go to Solution.
Accepted Solutions
08-03-2024 07:55 AM
Here is the Service Manual:
Start on p. 29 and follow directions. The hard part is the two long rubber strips. Be very careful removing them. If you stretch the rubber it will be hard to get them back in the channels. Also try to take the adhesive off with the strip so it can be reused. If the adhesive comes off the strips you can use a couple drops of rubber cement (not volatile model glue).
08-03-2024 07:55 AM
Here is the Service Manual:
Start on p. 29 and follow directions. The hard part is the two long rubber strips. Be very careful removing them. If you stretch the rubber it will be hard to get them back in the channels. Also try to take the adhesive off with the strip so it can be reused. If the adhesive comes off the strips you can use a couple drops of rubber cement (not volatile model glue).
09-27-2024 10:22 AM
Thanks for sharing the service manual! I appreciate the heads-up about the rubber strips; handling them with care is definitely key. It’s smart to reuse the adhesive if possible, and I hadn’t thought of using rubber cement great tip! I’ll keep all this in mind as I go through the process.
09-28-2024 01:47 PM - edited 09-30-2024 06:29 AM
Appreciate you sharing the service manual! The tips about the rubber strips are super helpful I'll be extra careful with them. Reusing the adhesive sounds like a great idea, and I hadn’t thought of rubber cement before.