how to reset motherboard bios hp envy x360 laptop 15 fe0xxx

[Qc9v75a]

Sir, I need to update the motherboard bios of my laptop completely.

[zoey7886]

@Qc9v75a, Welcome to the HP Support Community!  

Thanks for reaching out about your query regarding Resetting or Updating Motherboard BIOS! 

We're thrilled to have the opportunity to assist you and provide a solution.  

To reset or update the BIOS on your HP Envy x360 Laptop 15-fe0xxx, follow these steps:

Navigate to the HP Drivers and Downloads:

• Visit the HP support website.

Identify your Product:

• Enter your laptop's serial number or product name (HP Envy x360 Laptop 15-fe0xxx).

Access Software, Drivers, and Firmware:

• Click on the Software, Drivers, and Firmware option.

Select Operating System:

• Choose your operating system and version, then click Submit.

Locate BIOS Update:

• Expand the BIOS section by clicking the Plus (+) sign.
• Select the appropriate BIOS version for your laptop.
• The latest BIOS version for HP Envy x360 Laptop 15-fe0xxx is F.06, Rev 1 (SP152801).
• Download BIOS update here.

Download and Install BIOS:

• Click the Download button to start the download.
• Follow the on-screen instructions to complete the installation.  

Hope this helps! 

Take care, and have an amazing day!  

Did we resolve the issue? If yes, Please consider marking this post as "Accepted Solution" and click "Yes" to give us a helpful vote - your feedback keeps us going!  

Regards, 

[Frank17590]

HP ENVY x360 Convert 15-es0003 and the computer freeze when it start the installation for the bios version f20. I have to old the power button 10 seconds to turn it off

[zoey7886]

@Frank17590, Welcome to the HP Support Community!  

Thanks for reaching out about your query regarding HP ENVY x360 Convert 15! 

We're thrilled to have the opportunity to assist you and provide a solution.  

Here’s what you can try:

Perform a Hard Reset: Hold the power button for 10–15 seconds to fully shut down the laptop.

Clear CMOS / Reset BIOS:

Disconnect the charger.

Press and hold Windows + B, then press and hold the Power button for 2–3 seconds. Release all keys.

If successful, your system should initiate BIOS recovery. Follow the on-screen steps.

If the issue persists or the system doesn’t respond, we recommend rolling back or re-flashing the BIOS using a recovery USB from the HP BIOS Recovery page.

Let us know how it goes — we’re here to help!  

Hope this helps! 

Take care, and have an amazing day!  

Did we resolve the issue? If yes, Please consider marking this post as "Accepted Solution" and click "Yes" to give us a helpful vote - your feedback keeps us going!  

Regards,