Product: 5MK62EA#UUW Operating System: Microsoft Windows 10 (64-Bit) Serial number [Private information removed] Hello, i would like to upgrade ram to 32 Gb *2*16* but i am not sure this model can support or not! i know in Maintenance and Service Guide in here https://support.hp.com/gb-en/product/hp-pavilion-gaming-15-cx0000-laptop-pc/20284020/model/26309756/... this service guide mention max 2*8gb 2666 , but is there any possible to upgrade to 2*16gb so-dimm 260 pin 2666 and next question , i have already 512 gb hdd 7200, but i want to change to 1tb ssd and last question> can i remove M.2 ssd *now 256Gb* and put M.2 512 Gb ?? and how can I check for expample this model Crucial DDR4 8GB 2666MHz CL19 Ikke-ECC SO-DIMM 260-PIN
Your model support Two non-customer-accessible/upgradable memory module slots DDR4-2666 dual channel support (8750H/8300H processors) DDR4-2400 dual channel support (8550U/8250U processors) Supports up to 16 GB of system RAM in the following conƭgurations
● 16384-MB total system memory (8192×2)
● 12288-MB total system memory (8192×1) + (4096×1)
● 8192-MB total system memory (8192×1) or (4096×2)
● 4096-MB total system memory (4096×1)
And it support M.2 solid-state drive, TLC:
256 GB, PCIe
128 GB, PCIe
128 GB, SATA-3
Your product will not support 32GB memory and 512GB SSD.
Keep us posted,
If you would like to thank us for our efforts to help you,
Give us a virtual high-five by clicking the 'Thumbs Up' icon below, followed by clicking on the "Accept as solution" on this post,
i know it and i have checked all that you mentioned. but i have cheeked www.crucial.com and scan my system and i have seen my system can support 32gb *it should be support otherwise it will be very strange!* and i can upgrate PCIe to 500 gb and another hardisk to 1tb . but i want to be sure before i buy it 😉 so i am not sure i get right answer in here 🙂
Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".