Need 3D driver.

[REO51ST]

ACPI\HPQ6000

Thanks

REO

[CherylG]

HP 3D Drive Guard:

http://ftp.hp.com/pub/softpaq/sp71501-72000/sp71714.exe

[REO51ST]

Thanks @CherylG but that one did not work.

Trying to make a master image of this model.

Just did the Creators update and after rebooting it says that my 3D driver had a conflict with W10.

REO

[CherylG]

@REO51ST

Latest one I have found is this. Maybe @DavidPK has another:

http://ftp.hp.com/pub/softpaq/sp81001-81500/sp81142.exe

[CherylG]

@REO51ST

The tip posted here by DavidPK may be needed:

https://h30434.www3.hp.com/t5/Commercial-PC-Software/Accelerometerdll/m-p/6292712#M2171

[Paul_Tikkanen]

Hi:

sp71714 is the only W10 driver for that 3D driveguard hardware version, and it doesn't work, except with the first (maybe also the 2nd) edition of W10.

The above driver absolutely does not work with the latest Creator's Edition.

Anyone with the 2nd version 3D driveguard hardware (6000) gets that error.

No fix as of yet, but the bug was reported to Microsoft a while back.

You can also see that the latest hardware version (6007) is having major issues with the latest version of W10, and there were some fixes that used to work, that no longer work.

DavidPK is the only one who has posted a fix that works currently for the 6007 version of the 3D driveguard.

Hopefully Microsoft will release a fix to allow the driver to work again.

[DavidPK · Accepted solution]

Hi @REO51ST

Download the version of HP 3D DriveGuard on the following link and save it to your Downloads folder.

http://ftp.hp.com/pub/softpaq/sp81001-81500/sp81142.exe

Download and install the x64 version of 7-Zip on the link below.

http://www.7-zip.org/

When you've installed 7-Zip, open your Downloads folder, right click on the sp81142 package, select 7-Zip, select extract files and then click Ok.

Cut this newly extracted folder and paste it on your Desktop so it's easy to find.

When done, hold down the Windows key and press R

Into the Run window, type devmgmt.msc and hit enter.

In Device Manager, expand System devices, right click the HP Mobile Data Protection Sensor entry and select 'Update Driver Software'.

In the following window, select 'Browser my computer for driver software' and then select 'Let me pick from a list of device drivers on my computer'.

In the next window, click the 'Have Disk' button and then browse to the extracted  sp81142 folder you pasted on your Desktop.

Browse into the sub-folder InstallFiles, open the folder Win10, left click on the file accelerometer to highlight it and then click Open.

Click on 'Ok' and then click 'Next' and wait for the driver to install.

When done, click 'Close' and then click 'Yes' to restart the notebook.

All the best,

David

[REO51ST]

@DavidPK

I have tried around 10 different drivers none worked.

Tried this one and it  worked like a champ.

Thanks David

REO

[Paul_Tikkanen]

That is amazing!

How does that driver work on the HPQ6000 ID when the only hardware that driver supports is for the 6007 device?

[Manufacturer]
%Mfg%=HP,ntx86,ntamd64

[HP.ntx86]
%DeviceDesc% = HPAccelerometerDriverInstall.ntx86, ACPI\HPQ6007

[HP.ntamd64]
%DeviceDesc% = HPAccelerometerDriverInstall.ntamd64, ACPI\HPQ6007

[CherylG]

@REO51ST

Happy to hear it worked. A little dismayed that you discounted @DavidPKsolution when I posted link to it two days ago.