-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Notebooks
- Notebook Video, Display and Touch
- Re: Touch screen firmware upgrade

Create an account on the HP Community to personalize your profile and ask a question
05-14-2016 07:44 AM
I am upgrade HP Spectre Pro x360 G2 with HP UHD Touchscreen Controller Firmware Update
(File name: sp74836) for HP Spectre x360 - 15t-ap000 CTO (ENERGY STAR).
Firmware upgrade is FAILURE! Touch screen is not work.
1. How to restore firmware?
or
2. May be issue QHD Touchscreen Controller Firmware for HP Spectre Pro x360 G2 <V1B05EA>?
Thanks.
Solved! Go to Solution.
Accepted Solutions
11-25-2016 06:35 AM
The problem is solved !
Since yesterday is under the following link a firmware for the touch screen is available
New Firmeware for spectre x360 13 Touchscreen!
Look at:
"HP QHD Touchscreen Controller Firmware Update" 21.Nov.2016
The firmware could be installed without problems and the touchscreen was immediately available again.
The HP Active Pen 408 also works perfectly.
Greeting
05-19-2016 12:31 PM
Hi,
Try the below links (in an orderly fashion)
http://support.hp.com/ee-en/document/c02693833
if the above doesn't work: http://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-c02638587
Download drivers from : http://support.hp.com/us-en/product/HP-Spectre-x360-Convertible-PC-Series/7527520/model/7791778/driv...
if the touchscreen doesn't work on BIOS (access by restarting & tapping on F10) : contact HP for an LCD replacement via 1800-474-6836.
Riddle_Decipher
I am an HP Employee
Learning is a journey, not a destination.
Let's keep asking questions and growing together.
06-04-2016 04:49 AM
I have also done the firmware updrage, and the touch screen does not work anymore.
I did whatever is said here, and a full factory re install, and the screen does not work.
I've sent a essage to HP support, I hope they will answer. How to go back to factory firmware and make the touch screen work again.
06-04-2016 11:41 AM
Hi, Ernesto
Upgrade BIOS, drivers, reset system etc. doesn't help in my case.
I think touchscreen is good, but I put incorrect firmware into controller.
So system does not see touchscreen (on hardware level) because controller does not work.
I hope what HP make upgrade for touchscreen controller firmware for my laptop and then everything will work.
06-05-2016 04:39 AM
Thank you very much for ypur comment.
Yes, you are right, I did all that and it didn'twork.
I hope HP will upgrade or publish a touscreen controller firmware. I still have no reaction or answer from them
Let's see this week. I am frustated with this issue, sincerely except this, I like a lot the spectre, it's really light and powerfull. I have the x360 g2 with the i7 6600, 500 gb of hd and 8 gb if ram. It's really a nice piece of art in such a light and thin envelop.
I was trying simply to use a stylus pen with it.
Let's see.
06-16-2016 11:05 PM
I wonder why HP is reluctant to release a touch screen driver on HP Support. I don't believe the touch screen issue due to a missing driver or hardware detection failure can only be resolved by screen replacement which is a much more expensive solution. What a loss for HP.
10-21-2016 01:29 AM
Hello
Well, after contacting HP CUstomer Services, they first try to solve the problem on-line, but it didn't worked out. And, finally, they've changed the PC. Now, all it's working OK. So, apparently it was a hardware problem.
Customer Services was good, I cannot complaint, I rather congratulate HP services. A good Customer Service is becoming rare these days, that's a good value. Thanks HP.