-
×InformationWindows update impacting certain printer icons and names. Microsoft is working on a solution.
Click here to learn moreInformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationWindows update impacting certain printer icons and names. Microsoft is working on a solution.
Click here to learn moreInformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Notebooks
- Notebook Wireless and Networking
- Re: Hp 6600 will not connect to WiFi
![Sign in](/html/assets/sign-in-banner.png)
Create an account on the HP Community to personalize your profile and ask a question
04-20-2024 06:34 AM
Reset Instructions (only if needed)
|
WiFi connect using the control panel
https://www.youtube.com/watch?v=LAYh6pb_Si4&ab_channel=VinnelTV
This printer uses only the 2.4ghz band. Click here for users manual.
Full feature software May 2022
https://ftp.hp.com/pub/softlib/software12/COL41850/mp-108845-4/Full_Webpack-1323_1-OJ6600_Full_Webpa...
OfficeJet Reference
Thank you for using HP products and posting to the community.
I am a community volunteer and do not work for HP. If you find
this post useful click the Yes button. If I helped solve your
problem please mark this as a solution so others can find it
04-21-2024 03:47 PM - edited 04-21-2024 03:50 PM
The printer has a display that can list the SSID (name) of the WiFi networks in your area.
Do any show up?
What is the name of your network? I recommend you log into the modem and chose a different name for the 2.4ghz band. You can try it yourself or contact your ISP and ask for help.
I have an Arris modem, yours may be different. This tutorial is helpful. The username might be admin and the password should be printed somewhere on the modem. If not, then use that tutorial. Use a different name for the 2.4 or the 5ghz bands. To keep it simple, use the same password and use only numeric digits such as someone's phone number. When in the router, run the app that finds the channel with the least amount of noise for both bands.
Save your settings and reboot the modem.
At the printer look for the name (SSID) of the 2.4ghz band, enter your password and connect.
Get a printer network report.
To print the network configuration page from the printer control panel From the Home screen, touch (right arrow), and then touch Setup. Touch Reports, and then touch Network Configuration Page. |
The PINs and Passwords should show up. Here is the important stuff from a typical printer report. The password shown in WiFi can be the printers PIN or the modem's password depending on how you connected to the modem.
LAN | STATUS | IP address | SSID | Password |
WiFi | enabled | 192.168.1.15 | ATT-ARRIS-2 .4 | GuessAgain |
WiFi-direct | enabled | 192.168.123.1 | DIRECT-WHATEVER | BadGuess |
Wired | disabled | |||
USB | disabled |
see if you can connect to the 2.4ghz band and get a network report. If the IP address starts with 169 then the printer is not connected.
Thank you for using HP products and posting to the community.
I am a community volunteer and do not work for HP. If you find
this post useful click the Yes button. If I helped solve your
problem please mark this as a solution so others can find it
Didn't find what you were looking for? Ask the community