Realtek RTL8852BE-VS WiFi 6 802.11ax PCIe Adapter

[Mbh68]

I do not think that disable modern standby fix completely the problem !!!

For me, there is a problem with the reinit after waking up from sleep....

[BeemerBiker]

If you have Fast Start enabled then the hibernate file is used to restore the previous state of the system.  That file may have old settings!!

With your laptop working, create a new hibernate file as follows

To get a new hiberfile do the following. Enter 'CMD' in the windows search and select 'run as administrator'.
Be sure to close other apps to avoid losing data during the hibernation.

powercfg -h off
powercfg -h on
shutdown /h

when your system reboots, it should start with the same device settings as it had when the hiberfile was created.

[Mbh68]

I go back to S0 mode,

and turn "Power mode" setting in Windows to "performance" mode.

I allways "Stop" Windows on "Power down".

@Kev2001, try "Power mode" setting in Windows to "performance" mode,

I think, this is the best solution to day !!!

[pcdelozi]

I also do not see the POWER MANAGEMENT for that CRAY Adapter.  It's in my computer and I've been dealing with this issue for almost 9 months.  One thing that does help the CRAY is if I'm plugged into the power cord, it doesn't disconnect and need to be reset as much.

[pcdelozi]

I have the SAME maddening issue.  I stream TV and there is NEVER a hic-cup.  Can be on my computer at the same time and ZAP - connection dropped.  I wish I had a dollar for every time I've ran the "FIX YOUR NETWORK" from HP Support Assistant.

[Mbh68]

I think the problem has almost disappeared since 1-2 weeks, following an update?

[pcdelozi]

WHAT UPDATE?

[Mbh68]

I don't know,

i make all Windows and HP update ...

[Mbh68]

Bad news, the same problem comes back ...

never solved or a bad update ???

[pcdelozi]

Never solved.  My issue seems to be better if I'm plugged in with the power cord vs. being on battery; however, I still have "freezes" and have to run the "Fix your network" thru the HP Support Assistant.   MADDENING!