Showing results for 
Search instead for 
Did you mean: 
New member
2 0 0 0
Message 1 of 2
Flag Post

Wireless IRQ Test & Wireless ROM Test was cancelled after running System Fast Test in HP Diagnostics

HP Recommended
HP 15-AF103AX
Microsoft Windows 10 (64-bit)

Hello Everyone,

I hope you all are Healthy, Happy and Vertical today. I am here to ask for help. Today, which is 03/07/2020 (11 : 37 am) I actually performed "System Fast Test" in "Hp Hardware Diagnostics Tool" All the component's test went through just fine however the component test of "Wireless IRQ Test" and "Wireless ROM Test" got cancelled for no reason and I have attached the image of the test log along with my question.


The test didn't fail instead it just got cancelled for no reason, I don't know why it got cancelled instead of running and I really don't have an idea regarding what actually happened, i tried to run the component test for these two components separately as well however still the test got cancelled for these two components I was trying to test.


Cancelled test of Components are as follows:

1. Wireless IRQ Test

2. Wireless ROM Test


Please help, I am worried  whether something has gone wrong with my PC.  I will be waiting for your word. Thank you so much.Hardware Diag Results.PNG



HP Support Agent
HP Support Agent
31,166 30,826 2,619 4,015
Message 2 of 2
Flag Post
HP Recommended

@Ajith_Kumar_A Is the wireless adapter working on the device? If yes, we may need to update the hardware diagnostics tool:

Install the latest version of the HP Hardware diagnostics (UEFI) on your device using this link: Click here for details


If it's not working, I suggest you update the same, and then perform the below tests:

  • Hold the power button for at least five seconds to turn off the computer.
  • Turn on the computer and immediately press Esc repeatedly, about once every second. When the menu appears, press the F2 key.
  • On the HP PC Hardware Diagnostics (UEFI) main menu, click System Tests.
  • Click Extensive Test.
  • Click Run once, or Loop until error.
  • While the test is running, the time remaining and test result for each component display on the screen.

If a component fails a test, write down the failure ID (24-digit code) for when you respond back to us.


P.S: Welcome to HP Community 😉

If you wish to thank me for my efforts, you could click on "Accept as solution" on my post as the solution should help others too.

I am an HP Employee

Was this reply helpful? Yes No
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation