-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Archived Topics
- Notebooks Archive
- Re: 650 G1 built in microphone not working in windows 10

Create an account on the HP Community to personalize your profile and ask a question

10-27-2015 03:20 PM
Does anyone know of a working IDT audio driver for 650 G1 windows 10 64 bit?
I don't see a driver on HP support page and I have tried many other older previous drivers and settings. Internal speakers are working but internal microphone is completely unresponsive. Sound indicator in "Recording devices" does not show sign of even a bit sound being picked up.
Any suggestions? And does anyone know if HP are working on an updated IDT driver for windows 10?
10-27-2015 04:02 PM - edited 10-27-2015 04:05 PM
stokholt
have you install the Frameworks net. 3.5 an 4.6?
uninstall the old idt driver
reboot
install the new driver
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!
10-27-2015 11:16 PM
@go2 wrote:stokholt
have you install the Frameworks net. 3.5 an 4.6?
uninstall the old idt driver
reboot
install the new driver
Tried that but installation process is aborted when trying to install sp71886.
"The detected hardware is not supported by this IDT software package. Installation will be aborted".
Do you have other suggestions or am I doing something wrong? Any help is much appreciated.
10-28-2015 01:32 PM
Hi Stokholt
That seems the driver that you need is this one:
Though it is related to Win 8.1
In my case (HP Probook 4340s and Win 10) when I was trying to use driver that is not for Win 10 I had really bad clogging sound. When tried to install more "newer" softpaqs I received the same message: "not supported".
Finally I even have downloaded Tempo (original IDT) driver from HP site, installation of this one also was aborted.
But then I just manually update IDT driver in the Device Manager pointing to folder where all softpaqs was unpacked (C:\swsetup) and my IDT driver was updated to version 6.10.6504 from Tempo
Here is Tempo driver: link
Good luck!
10-29-2015 01:24 PM
It seems I can update to driver version 6.10.6504 if first I installed 6.10.6499.0 but unfortunately it does not seem to change anything. Internal mic is still not responding.
I feel like there is nothing more to try and I have come to an end without solving the issue. Can the problem be hardware related? Speakers and webcam are working like a charm but not the built in microphone. The computer was sent to HP service center three months ago (warranty) for solving a minor issue with the screen lid sensor switch. I guess HP performed several tests on the system back then in order to make sure everything else were functioning correctly. Back then windows 8.1 pro was installed though.
Any idea in prying of the display bezel and checking the mic, wirering or something else? Any ideas or input is still greatly appreciated.
