-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center.
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center.
- HP Community
- HP Support Community Knowledge Base
- Poly Phones Knowledge Base
- Poly Phones Knowledge Base
- About Poly Edge E Series Halo LED Animations
RGB LED lights surround the screen of the Edge E 200, 300 and, 400 models while the Edge E 100 incorporates a single LED Bar above the screen. These lights are purposefully built to help visually communicate key states of phone:
- Voicemail
- Bluetooth Discovery
- Incoming Call
- Active Call/ OnHold
- Mute
- Off Hour
<!-- Call On-Hold Notification --> <halo ind.pattern.haloCallHold.step.1.duration="1000"/> <!-- 1000ms pattern cycle --> <halo ind.pattern.haloCallHold.step.1.color="Red"/> <halo ind.pattern.haloCallHold.step.1.effect="Breathe"/> <!-- 100% intensity down to 50% then back to 100% in 1 cycle --> <!-- Incoming Call Notification --> <halo ind.pattern.haloCallOffering.step.1.duration="1000"/> <!-- 1000ms pattern cycle --> <halo ind.pattern.haloCallOffering.step.1.color="Green"/> <halo ind.pattern.haloCallOffering.step.1.effect="Breathe"/> <!-- 100% intensity down to 50% then back to 100% in 1 cycle <!-- Bluetooth Discovery --> <halo ind.pattern.haloBluetoothScan.step.1.duration="1000"/> <!-- 1000ms pattern cycle --> <halo ind.pattern.haloBluetoothScan.step.1.color="Blue"/> <halo ind.pattern.haloBluetoothScan.step.1.effect="ChaseOnBlack"/> <!-- Voicemail --> <halo ind.pattern.haloVoiceMail.step.1.duration="1250"/> <!-- // 1000ms pattern cycle --> <halo ind.pattern.haloVoiceMail.step.1.color="Red"/> <halo ind.pattern.haloVoiceMail.step.1.effect="BreatheBottom"/> <!-- 100% intensity down to 50% then back to 100% in one cycle --> <!-- Off Hours Mode --> <halo ind.pattern.powerSaving.step.1.duration="0"/> <!-- results in a pattern cycle of ~5.5 seconds --> <halo ind.pattern.powerSaving.step.1.color="Yellow"/> <halo ind.pattern.powerSaving.step.1.effect="DimmedBreathe"/> <!-- 50% intensity down to 0% then back to 50% in 1 cycle --> <halo ind.pattern.powerSaving.step.1.state="0"/> <!-- To turn off the above effect (LEDs stay off) --> <!-- Mute --> <halo ind.led.alert.indicateMute="0"/> <!-- Indicate microphone mute active state on the alert LED -->
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.