-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Printers
- Printer Ink Cartridges & Print Quality
- Cartridge Replacement on Office Jet 6950

Create an account on the HP Community to personalize your profile and ask a question
11-24-2023 04:17 AM
When iI open the printer to get access to replace the print cartridges, the cartridges remain under a fixed cover and therefore cannot be removed and replaced. I have tried to move the cartridges manually and the usual switch off / switch on but neither worked.
11-27-2023 12:46 AM
Hi @Douglid,
Welcome to the HP Support Community.
I'd like to help!
This looks like there is a carriage jam.
Perform the following tasks in the order given. Use the printer after each task to see if the issue is resolved.
Check for obstructions in the carriage path
Remove any loose paper or obstructions that might be blocking the carriage path.
If the Cancel button on the control panel is lit, press it and wait until the printer is silent.
Turn off the printer, and then disconnect the power cord.
Open the cartridge access door to get to the carriage inside the printer.
EXAMPLES OF A CARTRIDGE ACCESS DOOR
Make sure the carriage is not obstructed by gently sliding the carriage side to side.
Look for and remove any obstructions in the carriage path, such as crumpled paper or dislodged labels.
CAUTION:
Do not tilt an ink tank printer when attempting to remove obstructions as ink might spill.
EXAMPLE OF A PRINTER WITH AN OBSTRUCTION IN THE CARRIAGE PATH
If the carriage has a latch, gently press it down to make sure it is locked into place.
CAUTION:
If the carriage latch of an ink tank printer is secured, do not press down on it to avoid printer damage.
EXAMPLES OF THE CARRIAGE LATCH
If the carriage is not locked in place, move it to each side, removing any obstructions blocking its path.
CAUTION:
Do not force the carriage to move if it is locked or stuck. This can damage the printer.
Close the printer door.
Reconnect the power cord, and then turn on the printer.
Click here for the remaining steps.
Hope this helps! Keep me posted for further assistance.
Please click “Accepted Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!
Nal_NR-Moderator
I am an HP Employee