Error message saying instant ink is not set up

[Painter55]

My printer started with error message saying scanner is damaged, and wouldn't copy or scan.  I attempted several fixes as advised through HP support pages, and now it won't even print, saying the Instant Ink is no longer enrolled,

[Kumar0307]

@Painter55, Welcome to the HP Support Community! I’m here to help.

I understand you are not able to scan or print. Scanner failure should not affect printing. Let us try these steps:

Reset the printer

1. With the printer turned on, disconnect the power cord from the rear of the printer.
2. Wait at least 60 seconds.
3. Reconnect the power cord to the rear of the printer.
4. Turn ON the printer, if it does not automatically turn on.
5. Wait until the printer is idle and silent before you proceed.

Note: HP recommends connecting the printer directly to a wall outlet rather than a surge protector or a power strip.

If this does not help, unplug the power cable and hold the power button down for 10-15 seconds and release it. Power on the printer and check.

Update the printer firmware

Click here to download and install the latest printer firmware from your Computer.

Click here to know different methods of updating printer firmware.

Check the scanner bar functionality

Perform a visual test of the scanner mechanism to see if it is jammed.

1. Remove any original documents or photos from the scanner glass.
2. Lift the scanner lid slightly, and then press the Copy button or icon.

If the scanner light does not move or moves halfway or is not lit, the scanner mechanism is likely jammed/broken. 

Have you checked your HP Instant Ink account page? Your Instant Ink account page will have notifications if there are any issues with the account or recent cartridge shipment, it will even provide solutions on how to fix the issue. You may log in to your HP Instant Ink account page from here.

Make sure the printer is connected to the internet.

Hope this helps! Let me know how it goes. 

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.

Click on the YES button to reply that the response was helpful and/or to say “Thank You”.

Have a great day!