HP 8710 printer, just put in a new cartridge, and the printer doesn't regester it, and wont work

[Ritner1609]

just put in a new ink cartridge, printer won't acknowledge it, and wont work, any thoughts?

[sandytechy20]

@Ritner1609

Welcome to the HP support community.

I understand that you are getting a cartridge error, I am glad to assist you.

Reset the printer

Reset the printer to recover from printer errors or failures.

1. If your printer has a rechargeable battery, remove it.

2. With the printer turned on, disconnect the power cord from the printer.

3. Unplug the power cord from the power source.

4. Wait 60 seconds.

5. Reconnect the power cord to a wall outlet and to the printer.

   NOTE: 

   HP recommends plugging the printer directly into a wall outlet.

6. Turn on the printer to complete the reset.

Clean the ink cartridge electrical contacts

Remove any debris or buildup from the contacts on the cartridges.

1. Open the door or lid to the cartridge access area. Wait until the carriage stops moving before continuing.

2. Push in on the cartridge indicated in the error message to release it from the carriage.

   

3. Wipe the copper-colored contact on the cartridge with a lint-free cloth.

   

4. Slide the cartridge into its color-coded slot until it clicks into place.

5. Repeat these steps for any other cartridges indicated in the error message.

6. Close the door or lid to the cartridge access area.

Update the printer firmware to install the latest updates

Here are the steps:- Click here

Here is the HP document for your future reference:- Click here

Let me know how it goes.

To thank me for my efforts to help you, please mark my post as an accepted solution so that it benefits several others.

Cheers.