-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Printers
- Printer Ink Cartridges & Print Quality
- HP printer Officejet Pro 8022_Incompatible cartridges issue

Create an account on the HP Community to personalize your profile and ask a question
10-02-2022 03:36 AM
Hello
I am located in Korea but HP Korea couldn't support this issue due to my printer is parallel import product.
I bought cartridge from amazon and HP 910 ink cartridges work with HP OfficeJet 8022. But my printer keep saying the 910 is incompatible cartridge.
My printer is updated with new firmware (OJP8020_8030_2213A) but this issue is still ongoing. Could you support this issue? Thank you!
https://www.amazon.com/-/ko/dp/B07VMK5NDB?psc=1&ref=ppx_yo2ov_dt_b_product_details&language=en_US
Thank you.
Best Regards
Jung-Hwa Yang
10-21-2022 10:54 AM
@Junghwa
Welcome to the HP support community.
I understand that you are getting cartridge error, I am glad to assist you.
Reset the printer
- Reset the printer to recover from printer errors or failures.
- If your printer has a rechargeable battery, remove it.
- With the printer turned on, disconnect the power cord from the printer.
- Unplug the power cord from the power source.
- Wait 60 seconds.
- Reconnect the power cord to a wall outlet and to the printer.
- NOTE: HP recommends plugging the printer directly into a wall outlet.
- Turn on the printer to complete the reset.
Clean the ink cartridge and printhead electrical contacts
- Remove any debris or buildup from the contacts on the cartridges and in the carriage.
- Open the door or lid to the cartridge access area. Wait until the carriage stops moving before continuing.
- Remove the cartridge indicated in the error message from the carriage.
- Wipe the copper-colored contact on the cartridge with a lint-free cloth.
- Place the cartridge to the side with the contact facing upwards.
- Wipe the contact inside the printhead with a lint-free cloth.
- Reinsert the cartridge into its color-coded slot, and then press down on it until it snaps into place.
- Repeat these steps for any other cartridges indicated in the error message.
- Close the door or lid to the cartridge access area.
Refer to this HP document for further assistance:- Click here
Keep me posted.
If this helps, please mark the public post as an accepted solution so that it benefits several others.
Cheers.
Sandytechy20
I am an HP Employee