-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Printers
- Printer Ink Cartridges & Print Quality
- HP super tank plus 559

Create an account on the HP Community to personalize your profile and ask a question
08-12-2023 02:29 AM - edited 08-12-2023 02:31 AM
Welcome to our HP User Forum!
To change the print head ink cartridges in the HP Smart Tank Plus 559 Wireless All-in-One Color Printer, you can follow these general steps:
Turn On the Printer: Make sure the printer is powered on.
Open the Cartridge Access Door: Locate the cartridge access door on your printer. It's usually on the front or top of the printer. Open the door to access the ink cartridges.
Wait for the Cartridges to Stop Moving: Once you open the cartridge access door, the ink carriage will move to a position where you can access the cartridges. Wait for it to become idle.
Identify the Empty Cartridge: Check the printer's display or the indicator lights to identify which cartridge needs to be replaced. Note the cartridge color and number.
Unlock and Remove the Old Cartridge: Gently press down on the cartridge you're replacing and then pull it out towards you. Some printers might have a lever that needs to be lifted to unlock the cartridge.
Unpack the New Cartridge: Take the new cartridge out of its packaging. Be careful not to touch the copper contacts or the nozzles.
Install the New Cartridge: Slide the new cartridge into the correct slot, aligning it with the corresponding color label or icon. Push it in until it clicks into place.
Lock the Cartridge: If there's a lever or latch to secure the cartridge, push it down or close it to lock the cartridge in place.
Close the Cartridge Access Door: Close the door that you opened to access the cartridges.
Check for Alignment or Calibration: Some printers might require you to run an alignment or calibration process after replacing the cartridge. If prompted on the printer's display or control panel, follow the instructions to perform the alignment.
Print a Test Page: To ensure that the new cartridge is functioning correctly, print a test page from the printer's control panel or using the printer software on your computer.
If you encounter any difficulties during the process, I recommend referring to the printer's user manual (see: HP Smart Tank Plus 559 Wireless All-in-One - Setup and User Guides | HP® Support) or checking the official HP support website for model-specific instructions and troubleshooting steps (see: HP Smart Tank Plus 559 Wireless All-in-One - Troubleshooting | HP® Support).
Kind Regards,
NonSequitur777