How do I change the wiper in an HP CP6015 transfer assembly?

[GaryLeeSmith]

I bought a replacement wiper for an HP CP6015 transfer belt assembly and am looking for instructions on how to replace this part.  The belt has lots of life in it, but is not scaping the unused toner correctly (I suspect the dump tray is full).

Thanks!

[Dragora]

Hi GaryLeeSmith

Changing the wiper in the transfer assembly of an HP Color LaserJet CP6015xh Printer can be a bit technical, but I can guide you through the general steps:

1. Turn off the printer and unplug it from the power source to ensure safety.
2. Open the printer’s front cover to access the transfer assembly.
3. Remove the transfer assembly by carefully pulling it out. Be cautious not to touch the black polymer belt as it is sensitive.
4. Locate the wiper blade within the transfer assembly. It is usually a small, rubber blade that cleans the belt.
5. Remove the old wiper blade by unscrewing or unclipping it from its position.
6. Install the new wiper blade by securing it in the same position as the old one.
7. Reinsert the transfer assembly back into the printer.
8. Close the printer cover and plug the printer back in.
9. Turn on the printer and run a test print to ensure everything is working correctly.

For more detailed instructions, you might want to refer to the : https://support.hp.com/us-en/product/setup-user-guides/hp-color-laserjet-cp6015-printer-series/model... 

I hope the above is helpful

[GaryLeeSmith]

I figured that part out.  What I need to know is how to disassemble the transfer assembly.  And hopefully without spilling the excess toner all over the place.

🙂

[Dragora]

Hi GaryLeeSmith:

You can guide yourself through the respective process with: https://support.hp.com/sg-en/document/c02674821

I hope the above is helpful

[GaryLeeSmith]

I get what you are saying, however, I would like to find a technical reference on how to disassemble the transfer assembly to replace the wiper.  I know I can just start removing screws, but it would be nice to have actual instructions.  I'm sure HP has something on the subject.