How to remove air bubbles from hp printer 410

[Nazrulnagar]

There is a air babbles in printer pipe, how to remove, is there any process. 

[Max3Aj]

@Nazrulnagar, Welcome to HP Support Community. 

Thank you for posting your query, I will be glad to help you. 

Yes, there are a few steps you can follow to remove air bubbles from the ink pipes of your HP Ink Tank Wireless 410 printer:

Check Ink Levels: Ensure that the ink tanks are filled with genuine HP ink. Low ink levels can cause air bubbles.

Perform a Power Cycle:

• Turn off the printer and unplug it for about 5 minutes.
• Plug it back in and turn it on.

Run a Printhead Cleaning Cycle:

• Open HP Smart or HP Printer Assistant on your computer.
• Navigate to Printer Maintenance → Clean Printhead.
• Run the cleaning process up to three times if needed.

Manually Prime the Ink System (if air bubbles persist):

• Open the ink tank access door.
• Use a syringe to gently pull ink from the printhead area until the ink flows smoothly in the pipes without gaps.

Check for Clogged Printheads:

• Print a Print Quality Diagnostic Page from Printer Maintenance.
• If colors are missing or faded, soak the printhead in warm water for 5-10 minutes, dry it thoroughly, and reinstall it.

Align the Printhead:

• Use HP Smart or HP Printer Assistant to align the printhead under Printer Maintenance. 

I hope this helps. 

Take care and have a good day. 

Please click “Accepted Solution” if you feel my post solved your issue, it will help others find the solution. Select "Yes" on the bottom left to say “Thanks” for helping! 

Max3Aj

HP Support