Incompatible cartridge problem 678 black ink

[srinikandalam]

Hi, I am getting Cartridge incompatible error msg for black cartridge no 678. Pls help me fix this. I have tried all opetions available in Net.

[praveenbv]

Hi@srinikandalam,

Apologies for all the inconvenience

Don't worry as I'll be glad to help, 

We understand that issue with ink cartridges  . Please follow the steps below.

Perform the following tasks in the order given. Use the printer after each task to see if the issue is resolved.

Check the ink cartridge numbers

Make sure the cartridge model numbers match your printer and country/region.

1. Open the door or lid to the cartridge access area. Wait until the carriage stops moving before continuing.

2. Look for the model number on each of the cartridges.

3. Go to the HP Store to verify they are compatible with the printer and your country/region.

4. Replace any incompatible cartridges.

   NOTE: 

   HP+ printers require Original HP cartridges.

Reset the printer

Reset the printer to recover from printer errors or failures.

1. If your printer has a rechargeable battery, remove it.

2. With the printer turned on, disconnect the power cord from the printer.

3. Unplug the power cord from the power source.

4. Wait 60 seconds.

5. Reconnect the power cord to a wall outlet and to the printer.

   NOTE: 

   HP recommends plugging the printer directly into a wall outlet.

6. Turn on the printer to complete the reset.

Clean the ink cartridge and carriage electrical contacts

Remove any debris or buildup from the contacts on the cartridges and in the carriage.

1. Open the door or lid to the cartridge access area. Wait until the carriage stops moving before continuing.

2. Remove the cartridge indicated in the error message from the carriage.

   • Carriages with cartridge latches: Open the latch, and then pull the cartridge up and out of the slot.

     

   • Carriages without cartridge latches: Gently press down on the cartridge to release it, and then pull it out of the slot.

     

3. Holding the cartridge by the sides, remove any protective tape that still might be on the contacts.

   CAUTION: 

   Do not touch the ink nozzles or the copper-colored electrical strip. Touching or trying to remove these parts can result in clogs, ink failure, and bad electrical connections.

   

4. Lightly dampen a lint-free cloth with distilled water, and then wipe the copper-colored contacts on the cartridge.

   

5. Lightly dampen a lint-free cloth or swab with distilled water, and then clean the electrical contacts in the carriage.

   

6. Wait 10 minutes for the contacts to dry, and then reinsert the cartridge into its color-coded slot.

7. Repeat these steps for the other cartridge if it was indicated in the error message.

8. Close the door or lid to the cartridge access area.

   If the error persists, clean the cartridge and carriage contacts a second time.

Replace the problem ink cartridge

Installing a new cartridge can resolve ink-related errors.

1. For best results, replace the cartridge with a genuine HP cartridge. To find your cartridge number and purchase HP ink supplies, go to the HP Store or a local retailer.

   NOTE: 

   If you have a defective HP cartridge, it might be under warranty. Go to About Original HP Cartridges for page yield and HP limited warranty information.

2. Open the door or lid to the cartridge access area. Wait until the carriage stops moving before continuing.

3. Remove the cartridge indicated in the error message, and then insert the new cartridge into the slot.

4. Repeat these steps to replace any other cartridges indicated in the error message.

5. Close the door or lid to the cartridge access area, and then follow any instructions to align the printer.

Hope this helps! Keep me posted.

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.

Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Have a great day!