Inkt level on HP62XL Black displays Empty, while newly installed

[DonSadasi]

Inkt level on HP62XL Black displays Empty, while newly installed

(reinstalled the cardridge many times)

[sandytechy20]

@DonSadasi 

Welcome to the HP support community

I understand that you are getting cartridge error, I am glad to assist you.

Reset the printer

• Reset the printer to recover from printer errors or failures.
• If your printer has a rechargeable battery, remove it.
• With the printer turned on, disconnect the power cord from the printer.
• Unplug the power cord from the power source.
• Wait 60 seconds.
• Reconnect the power cord to a wall outlet and to the printer.
• NOTE: HP recommends plugging the printer directly into a wall outlet.
• Turn on the printer to complete the reset.

Update Firmware

HP regularly releases new printer firmware versions with product enhancements or issue fixes.

To see how to update your printer, go to Update the firmware on an HP printer.

Clean the electrical contacts

• Remove any ink or debris from the contacts on the cartridges and in the carriage.
• Turn the printer on.
• Open the door to access the cartridges, wait for the carriage to stop moving, and then remove the cartridge.
• Lightly dampen a lint-free cloth with distilled water, and then wipe the copper-colored contacts on the cartridge.
• 
• Lightly dampen a lint-free cloth or swab with distilled water, and then clean the electrical contacts in the carriage.
• 
• Wait 10 minutes for the contacts to dry, and then reinsert the cartridge into its color-coded slot.
• Repeat these steps for the other cartridge if it was indicated in the error message.
• Close the door or lid to the cartridge access area.

Refer to this HP document for further assistance:- Click here

Keep me posted.

To thank me for my efforts to help you, please mark my post as an accepted solution so that it benefits several others.

Cheers.