Laser Jet M283fdw poor quality printing

[Johnnywhat]

I have a M283fdw printer, purchased in July 2021, ever since then the print quality has gotten worse. it's now near the point that the pages can not be read properly. I've tried cleaning, realigning, new cartridges and the problem is still the same. Is there somewhere these can be repaired?

[A_Gayathri]

Hi @Johnnywhat,

Welcome to the HP Support Community

I understand you are facing a print quality issue with your HP  printer. Not to worry I will help you to get a resolution to resolve the issue.

To assist better:

• Are you using genuine HP ink cartridges?
• Does the copy print out the same way? 
• What's the application you are trying to print from? 
• Have you tried printing from a different application or device? 

While you respond to that, let's print a Print Quality Diagnostic page -Post the Print Quality Diagnostic page here so we can help you further. 

You may also refer to this document with steps to fix the " Print Quality Issues" issue applicable to your printer -  Print Quality Issues

 Also, try updating the printer's firmware - HP Printers - Updating or Upgrading Printer Firmware 

Let's perform a power drain: 

• With the printer turned on, disconnect the power cord from the rear of the printer and also unplug the power cord from the wall outlet.
• Remove USB cable, if present.
• Wait for 2-3 minutes, press and hold the power button on your printer for about 30 seconds to remove any additional charge.
• Now plug back the power cable straight to a wall outlet without any surge protector or an extension cord (This is important) and then plug back the power cord to the printer.
• Turn on the printer and wait till warm-up period finishes and the printer is idle

Update the printer firmware 

• Click here to download and install the latest printer firmware from your product
• Click here to know different methods of updating printer firmware.

Hope this helps! Keep me posted. 

Please click “Accepted Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!