LaserJet CM6040 - horisontal stripes

[ARKHAUS]

Hello
My LaserJet CM6040 have some issues with the print quality and puts a lot of stripes on places where they don't belong. It is easiest to understand taking a look on the attached scan of a printed page. 

In addition I can tell that the level of the cyan cartridge is very low. But for me the stripes look more magenta than cyan...

Any suggestions...?

Thank you!

[Valsimot]

Remove transfer belt, clean it with dry cloth. Inspect drum both for magenta and cyan.

[ARKHAUS]

Hi Valsimot

Thank's for the reply!

I will check the transfer belt as suggested. For cleaning you mentioned to use a dry cloth. What do you think about the idea to put some alcohol on the cloth for better cleaning?

Regarding the drums: Is there anything special to be attentive to while inspecting?

[Valsimot]

Use dry cloth for cleaning the belt, you can use alcohol but it will not change a lot, cleaning is a temporary fix, you will probably need to get a new belt if the cleaning is helpful. For the magenta and cyan drum check if there are stripes on each.

[ARKHAUS]

I cleaned the belt as suggested, and it seems to work (for now).
Thank you very much, I appreciate!

- best from Norway
alex