Missing a SETUP Cartridge

[Mel3226]

I’m trying to finally set up my old printer and it looks like I’m missing the SETUP cartridge for the black ink. I want to know if there’s anyway to bypass this error if I have a new cartridge.

[A_Gayathri]

Hi @Mel3226,

Welcome to the HP Support Community

I understand you are facing Missing a SETUP Cartridge issue with your HP Printer. Not to worry I will help you to get a resolution to resolve the issue.

To assist better:

• Are you using genuine HP ink cartridges?
• Was there any recent update on the printer prior to the issue?
• Do you see any Error message on the screen which shows E1, E2, E3, or E4?

While you respond to that, Let's perform a power drain: 

• With the printer turned on, disconnect the power cord from the rear of the printer and also unplug the power cord from the wall outlet.
• Remove USB cable, if present.
• Wait for 2-3 minutes, press and hold the power button on your printer for about 30 seconds to remove any additional charge.
• Now plug back the power cable straight to a wall outlet without any surge protector or an extension cord (This is important) and then plug back the power cord to the printer.
• Turn on the printer and wait till warm-up period finishes and the printer is idle

Update the printer firmware 

• Click here to download and install the latest printer firmware from your product
• Click here to know different methods of updating printer firmware.

If the issue persists, then please follow the steps mentioned in this document:  Missing a SETUP Cartridge

Hope this helps! Keep me posted.  

Please click “Accepted Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!