One or more cartridges are missing or damaged - OfficeJet Pro9018e

[Steve19660]

I just set-up a brand new OfficeJet Pro9018e.  I installed the cartridges and get an error message as follows: "One or more cartridges are missing or damaged".  I have taken them out and installed correctly multiple times.  I unplugged the printer, waited , and plugged back in.  Nothing works.

[Jay_G24]

Hi @Steve19660,

I'd like to help!

I understand you are facing a cartridge error on the printer.

Follow the steps to resolve the issue-

Reset the printer

Reset the printer to recover from printer errors or failures.

1. If your printer has a rechargeable battery, remove it.

1. With the printer turned on, disconnect the power cord from the printer.

1. Unplug the power cord from the power source.
2. Wait 60 seconds.
3. Reconnect the power cord to a wall outlet and to the printer.
   NOTE: 
   HP recommends plugging the printer directly into a wall outlet.
4. Turn on the printer to complete the reset.

Clean the ink cartridge electrical contacts

Remove any debris or buildup from the contacts on the cartridges.

1. Open the door or lid to the cartridge access area. Wait until the carriage stops moving before continuing.

2. Push in on the cartridge indicated in the error message to release it from the carriage.

   

3. Wipe the copper-colored contact on the cartridge with a lint-free cloth.

   

4. Slide the cartridge into its color-coded slot until it clicks into place.

5. Repeat these steps for any other cartridges indicated in the error message.

6. Close the door or lid to the cartridge access area.

 If the issue persists, I'd suggest you contact HP in your region regarding the service options for your printer

Hope this helps! Keep me posted. 

And, Welcome to the HP Support Community. 

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.

Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping