Performing alignment on HP Deskjet F4210 printer

[Poisy1978]

How does one perform an alignment on the HP Deskjet F4210 inkjet printer after installing an new ink cartridge?  The instructions say to press the "Scan" button after placing the alignment page on the scan bed.  But there is no "Scan" button on the F4210 panel.  What should one do instead to proceed with the alignment at this point?

[sandytechy20]

@Poisy1978

Welcome to the HP support community.

Align the product through the print driver

1. In HP Solution Center, click Settings, click Print Settings, and then click Printer Toolbox. The printer Toolbox opens.

2. On the Device Services tab, click Align the Print Cartridges. The product prints a cartridge alignment page.

3. Lift the scanner lid.

4. Place the alignment page on the front-right corner of the scanner glass with the print side down.

   NOTE: 

   See the engraved guides on the scanner glass for assistance in how to load the alignment page.

   Figure : Place the alignment page on the scanner glass

5. Lower the scanner lid.

6. Press the Scan button on the control panel. The product aligns the cartridges.

Let me know it goes.

To thank me for my efforts to help you, please mark my post as an accepted solution so that it benefits several others.

Cheers.