Print Streaking Issue

[rntaboy]

Recently my Envy 5055 has been printing with streaks. Occasionally a print will be totally fine, but usually the streaking happens. This mostly affects black text. I used the clean cartridge function in the Settings of the printer, which improved the print quality partially, but the my prints are still having the issue displayed in the Print Quality Diagnostic page below:

[sandytechy20]

@rntaboy

Welcome to the HP support community.

I understand that you are getting print quality issues, I am glad to assist you.

Manually clean the area around the ink nozzles

1. Gather the following materials:

   • A clean, lint-free cloth or a clean, dry cotton swab

   • Distilled or bottled water

        CAUTION: 

     Do not use tap water because it might contain contaminants that can damage the printhead.

2. Gently grasp the handles on either side of the printer, and then raise the ink cartridge access door until it locks into place.

   The carriage moves to the center of the printer.

   

3. Wait until the printer is idle and silent before you continue.

4. Lift up the lid on the ink cartridge slot, and then pull up on the ink cartridge to remove it from the slot.

   

5. Hold the ink cartridge by its sides.

   

6. Lightly dampen a clean, lint-free cloth or swab with bottled or distilled water.

7. Clean the face and edges around the ink nozzle with the cloth or swab.

      CAUTION: 

   Do not clean the ink nozzle plate.

   

   1. Nozzle plate - Do not clean

   2. Area surrounding ink nozzle - Do clean

   3. Ink cartridge contacts - Do not clean

8. Wait for the cleaned area to dry before you continue (approximately 10 minutes).

9. With the nozzles toward the printer, insert the ink cartridge into its slot until it snaps into place.

   NOTE: 

   Install the color ink cartridge on the left and the black ink cartridge on the right.

   

10. Close the lid on the ink cartridge slot to secure the ink cartridge into place.

11. Repeat these steps to clean around the nozzles on the other ink cartridge.

12. Close the ink cartridge access door.

Refer to this HP document for further assistance:- Click here

Keep me posted.

If this helps, please mark the public post as an accepted solution so that it benefits several others.

Cheers.