Printer cartridge holder

[Cuppa1]

My Printer cartridge holder broke. In fact both ended up breaking over time. After being unable to source replacement parts I repaired them using this method. 

1st  Tack the broken holder back together using Super Glue. Other brands available.

2nd - Using Araldite glue ( comes in two small tubes and mixes together to start Cure/hardening process) 

3rd - Apply Araldite glue generously across broken join and leave to harden. 

You could also add Q-Bond into the mix to mend broken plastic clips which I've also used in the past. 

Otherwise the printer will end up as landfill. 

[KrazyToad]

@Cuppa1

Welcome to HP Support Community

Since this is a hardware issue please contact HP Support in your region for service options

1) Click on this link - www.hp.com/contacthp/ 
2) Select your product type below.
3) Enter the serial of your device. 
4) Select the country from the drop-down. 
5) Select the chat or get phone number options based on your preferences. 
6) Fill the web-form and proceed further.

Thank you

If the information I've provided was helpful, give us some reinforcement by clicking the "Solution Accepted" on this Post and it will also help other community members with similar issue.