Printer continues (stubbornly) to print the header alignment page

[NOCALIBRATIONPL]

I own an HP ENVY 6000 All-In-One Printer (I know I selected "Select a product I don't own" but that's only because the product registration page doesn't work).

Every time I turn it on printer prints header alignment page, even if alignment has already been done (multiple times!).

Is it possible to stop this (really) annoying behavior?

Thanks for yours assistence

[Nal_NR]

Hi @NOCALIBRATIONPL,

Welcome to the HP Support Community. 

I'd like to help!

Reset the printer

• Reset the printer to recover from printer errors or failures.
• If your printer has a rechargeable battery, remove it.
• With the printer turned on, disconnect the power cord from the printer.
• Unplug the power cord from the power source.
• Wait 60 seconds.
• Reconnect the power cord to a wall outlet and to the printer.
• NOTE:
• HP recommends plugging the printer directly into a wall outlet.
• Turn on the printer to complete the reset.

Perform an alignment

• Align the printheads or cartridges in your printer when you replace them, to improve print quality, or to clear an alignment error.
• Make sure paper is loaded in the input tray.
• Open the HP Smart app, and then click the printer image.
• Click Print Quality Tools, and then select Align or Align Printheads.
• If prompted by the software or printer control panel to scan the Alignment Page, follow the instructions on the page to complete the alignment.
• If the alignment issue persists, continue with the steps and perform an alignment after each one.

Click here for further assistance. 

Update FIRMWARE

Hope this helps! Keep me posted for further assistance.
Please click “Accepted Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!