Printing quality and Panel Button

[Mahendra_26]

Printer- MFP M126nw

[Personal Information Removed]

printing quality not good and panel button not working 

please help me 

[Sneha_01]

HI @Mahendra_26,

Welcome to HP Support Community.

Thank you for posting your query, I will be glad to help you.

1. Improve Printing Quality

• Check Toner Cartridge: Ensure the toner cartridge is properly installed and has enough toner. If it’s low or empty, replace it with a new one.
• Print Quality Settings: Access the print settings from your computer:
  • Go to Devices and Printers (Windows) or Printers & Scanners (Mac).
  • Right-click on your printer and select Printing Preferences.
  • Adjust settings like print quality to "Best" or "Normal" instead of "Draft."
• Clean the Printhead: Use the printer's maintenance features to clean the printhead. This may be available through the printer's software on your computer.
• Print a Test Page: Print a test page to see if the issue persists. This can help identify if it’s a specific document or a general printing issue.

2. Troubleshoot Panel Buttons

• Power Cycle the Printer: Turn off the printer, unplug it from the power source, wait for about 1 minute, then plug it back in and turn it on. This can sometimes reset unresponsive buttons.
• Check for Software Updates: Make sure the printer firmware is up to date. Check the HP support website for any available updates.
• Inspect for Physical Obstructions: Look for any debris or physical obstructions around the panel buttons that may be causing them to stick or not respond.

3. Perform a Factory Reset

• If the issue persists, you may consider resetting the printer to factory settings. Refer to the printer’s manual for instructions on how to do this.

I hope this helps.

Take care and have a good day.

Please mark this post as “Accepted Solution” if the issue is resolved and if you feel this reply was helpful click “Yes”.

Rachel571

HP Support