Solved: Printing result problem - HP Support Community

Hawkar_plotchi- · ‎05-13-2022

Hello every one. My printer printing is have white line blonge the print result i need your helps

Thank you

Hawkar_plotchi- · ‎05-13-2022

Printhead test have not any problem just in printing the problem is appear

I replace with new printheads also have same problem

Repairatrooper · ‎05-13-2022

Run the paper advance calibration and also make sure that the print quality tests show no problems with the print heads. In some cases, failing to print at high quality and cause issues as well.

If you find the information provided useful or solves your problems, help other users find the solution easier by marking my post as an accepted solution. Clicking "yes" on "was this reply helpful" also increases the chances that this solution will help others.
I am a volunteer, offering my knowledge to support fellow users, I do not work for HP nor speak for HP.

Hawkar_plotchi- · ‎05-13-2022

Printhead test have not any problem just in printing the problem is appear

I replace with new printheads also have same problem

Hawkar_plotchi- · ‎05-13-2022

I try with paper advance calibration but same

Then i find another way which is in service menu have calibrate drop detector i try with this way the result is solving problem now my printer have not any horizontal banding

Note : to inter service menu the pass word is 3174

Thank you for helping

Printing result problem

Create an account on the HP Community to personalize your profile and ask a question