Put a new HP cartridge in my HP Officejet Pro 8600 and now it won't print at all.

[JeanieJohnston]

Put a new HP cartridge in my HP Officejet Pro 8600 and now it won't print at all. Old printer....about 10 years old.

Red X in corner. Message says " There is a problem with the printer or ink system. Turn printer off, then on. 

If problem persists, contact hp.

[Betty0610]

@JeanieJohnston

Welcome to the HP Support Community.

I'd be happy to help.

Let's try to reset the Printer here:

Reset the product

• With the printer turned on, disconnect the power cord from the rear of the printer.
• Unplug the power cord from the wall outlet.
• Wait at least 60 seconds.
• Plug the power cord back into the wall outlet.
• Reconnect the power cord to the printer.
• Turn the printer on. HP recommends plugging the printer directly into a wall outlet.

Also, try connecting the Printer to a different wall outlet directly.

Try a firmware update: https://support.hp.com/us-en/document/ish_1776648-1643972-16

Let me know if this helps.

Give us some reinforcement by clicking the Accepted Solution button, that'll help us and others see that we've got the answers and did reply to you!

Thanks!

Have a great day