Setup cartridge not installing

[Robo62]

During ink cartridge setup one cartridge continues to show an error “not communicating with Printer”.

have tried to install with a normal cartridge but setup won’t continue without the setup cartridges

[Irfan_06 · Accepted solution]

Hi @Robo62,

Welcome to the HP Support Community.

Thank you for posting your query, I will be glad to help you.

I understand you're experiencing an issue with your printer that has an ink cartridge error.

I apologize for any inconvenience this may have caused, I'm here to help you today.

Please follow the steps below to fix the issue.

A) Perform a power drain.

1) Take out the cartridges

2) Unplug the power cord from the printer & wall.

3) Press and hold the power button down for 15 seconds and release the power button, wait for about 30 seconds.

4) Plug the power cord back into the printer and wall, ensure the printer is plugged into the wall & not into a surge protector.

5) Insert the cartridges back into the printer.

Remove the cartridges > Unplug the power cord > Wait for 30 seconds > Plug the power cord back in > Insert the cartridges

B) Kindly refer to the steps on this link to update the printer firmware and let me know if that resolves the issue.

C) Refer to the steps on this link to further troubleshoot.

D) If the issue still persists, I've sent you a private message with the instructions to override the setup ink cartridges by using genuine HP ink.

In order to access your private messages, Click the Private message icon on the upper right corner of your HP Community profile Next, to your profile Name, you should see a little blue envelope, please click on it or simply click on this link

Please mark this post as “Accepted Solution” if the issue is resolved and if you feel this reply was helpful click “Yes”.

I hope this helps.

Take care and have a good day

Irwin6

HP Support