cannot printer

[HongShin]

the old cartage I used for 2 days then come out the ERROR 11 message

I changed a new cartage today, the print cannot printing now

[zoey7886]

Hi @HongShin,

Welcome to HP Support Community.

Thank you for posting your query, I will be glad to assist you.

I understand you're experiencing an issue with your printer that has an error message.

I apologize for any inconvenience this may have caused. I'm here to help you today.

Please follow the steps below to fix the issue.

A) Perform a power drain.

1) Take out the cartridges

2) Unplug the power cord from the printer & wall.

3) Press and hold the power button down for 15 seconds and release the power button, wait for about 30 seconds.

4) Plug the power cord back into the printer and wall, ensure the printer is plugged into the wall & not into a surge protector.

5) Insert the cartridges back into the printer.

Remove the cartridges > Unplug the power cord > Wait for 30 seconds > Plug the power cord back in > Insert the cartridges

B) Kindly refer to the steps on this link to update the printer firmware and let me know if that resolves the issue.

C) If the issue still persists, refer to the steps on this link to restore factory defaults and let me know if that resolves the issue.

Please mark this post as “Accepted Solution” if the issue is resolved and if you feel this reply was helpful click “Yes”.

I hope this helps.

Take care and have a good day.

HP Support