faulty catridge

[MOUZIAS]

I bought new catridges and after i printed 2 pages the printer says faulty ccatridge.

what do i do? did i just bin 34£?

[Riddle_Decipher]

@MOUZIAS Here's all you need to know and do, to resolve the issue:

Step 1: Use genuine HP ink cartridges

HP recommends that you use genuine HP ink or toner supplies. HP cannot guarantee the quality or reliability of non-HP or refilled cartridges. If you do not use genuine HP cartridges, the steps in this document might not resolve the issue. To check the authenticity of your cartridges, go to the HP anti-counterfeit webpage (in English).

Purchase replacement cartridges and other supplies from the HP Store or local retailers.

If using genuine HP ink cartridges resolved the issue, you do not need to continue troubleshooting.

Step 2: Acknowledge the message, and then continue with the print job

Click or press No, OK, or Continue to dismiss the message. The printer continues with the print job.

You might have to dismiss the message every time you print.

If these steps resolved the issue, you do not need to continue troubleshooting.

Step 3: Reset the printer

If you still cannot print or if you are not able to dismiss the error message, reset the printer.

1. With the printer turned on, disconnect the power cord from the printer.

2. Unplug the power cord from the power source.

3. Wait 60 seconds.

4. Reconnect the power cord to a wall outlet and to the printer.

   NOTE: 

   HP recommends plugging the printer directly into a wall outlet.

If these steps resolved the issue, you do not need to continue troubleshooting.

Step 4: Replace any empty or problem ink cartridges

Check the estimated ink levels through the printer software or control panel, and then replace any low or empty ink cartridges.

NOTE: 

Ink level warnings and indicators provide estimates for planning purposes only. When an indicator shows low ink levels, consider having a replacement ink cartridge available to avoid possible printing delays. You do not need to replace ink cartridges until print quality becomes unacceptable.

If an ink cartridge is empty, you might continue to receive this error message every time you print until the empty ink cartridge is replaced. The error can occur once for every empty ink cartridge installed in the printer.

If you received this error with a new ink cartridge, the ink cartridge might be under warranty.

If you have a defective cartridge or printhead, it might be under warranty. To check the warranty on your ink or toner supplies, go to Printer and Page Yield Overview, and then review the limited warranty information for your supplies.

P.S: Welcome to HP Community 😉

Let me know how that pans out,

If you feel I was helpful, simply click on Accept as Solution to help the community grow,

That said, I will have someone follow-up on this to ensure you've been helped,

Just in case you don't get back to us, 

have a good day, ahead.