my HP Deskjet Ink Advantage 2515. but when i install it my PC says Incompatible Ink Cartridges -- -

[SCPrinter]

my HP Deskjet Ink Advantage 2515. but when i install it my PC says  Incompatible Ink Cartridges -- -- Black   The cartridges listed above are not intended for use in this printer as it is currently configured.  

I did what was said "

04-26-2022 04:53 PM

Hi @philip201,

Welcome to the HP Support Community

I'd like to help!

I understand you are gacing cartridge error.

Try the below suggestions -"

But didn t work

[SCPrinter]

I did what the community said - BUT IS NOT WORKING

Holding the cartridge by the sides, remove any protective tape that still might be on the contacts.

CAUTION:

Do not touch the ink nozzles or the copper-colored electrical strip. Touching or trying to remove these parts can result in clogs, ink failure, and bad electrical connections.

Lightly dampen a lint-free cloth with distilled water, and then wipe the copper-colored contacts on the cartridge.

Lightly dampen a lint-free cloth or swab with distilled water, and then clean the electrical contacts in the carriage.

Wait 10 minutes for the contacts to dry, and then reinsert the cartridge into its color-coded slot.

Repeat these steps for the other cartridge if it was indicated in the error message.

Close the door or lid to the cartridge access area.

If the error persists, clean the cartridge and carriage contacts a second time.

Try the single cartridge mode 

The printer you own can work in single-cartridge mode, wherein the printer will be able to print with one cartridge in the printer. Which will help us identify if its a cartridge issue or a printhead issue 

To try single-cartridge mode follow the below steps:

• remove the black ink from the printer, leave the color in and try printing 
• then remove the color ink and, insert the black  in and try printing 

[Sneha_01]

Hi @SCPrinter,

Welcome to HP Support Community.

Thank you for posting your query, I will be glad to help you.

I understand that you are getting a cartridge error, I am glad to assist you. Please make sure you are using genuine HP ink cartrdiges.

Reset the printer

• Reset the printer to recover from printer errors or failures.
• If your printer has a rechargeable battery, remove it.
• With the printer turned on, disconnect the power cord from the printer.
• Unplug the power cord from the power source.
• Wait 60 seconds.
• Reconnect the power cord to a wall outlet and to the printer.
• HP recommends plugging the printer directly into a wall outlet.
• Turn on the printer to complete the reset.

Clean the ink cartridge and printhead electrical contacts

• Remove any debris or buildup from the contacts on the cartridges and in the carriage.
• Open the door or lid to the cartridge access area. Wait until the carriage stops moving before continuing.
• Remove the cartridge indicated in the error message from the carriage.
• Wipe the copper-colored contact on the cartridge with a lint-free cloth.
• Place the cartridge to the side with the contact facing upwards.
• Wipe the contact inside the printhead with a lint-free cloth.
• Reinsert the cartridge into its color-coded slot, and then press down on it until it snaps into place.
• Repeat these steps for any other cartridges indicated in the error message.
• Close the door or lid to the cartridge access area.
• Here is the HP document for further assistance:- Click here

I hope this helps.

Take care and have a good day.

Please click “Accepted Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!

Rachel571 

HP Support