Constant paper jams after main drive replacement.

Shindy00 · ‎11-11-2021

Hello all,

I'm having a issue with constant printer jams. I've included some photos of how the paper jams.

Things I did:

Changed fuser, changed rollers, ran components tests, changed IBT, ran sensor tests.

NOTE: this started happening AFTER I changed the "main drive assembly" I am sure your all aware the amount of labor it takes to remove that.....

Printer booted fine. I thought it might be fuser but we put a new one in and we even used a different fuser from the same type in building still kept happening.

Would appreciate any input, I'm open to suggestions!

One more thing... here is the picture of the paper

Notice it's getting bent on the corners? I don't understand what is blocking it. And yes I've cleaned everything.

Thanks all in advance hope to hear from you

Repairatrooper · ‎11-12-2021

Check the mylar strip on the registration sensor assembly. They are easily bent and result in this type of behaviour.

If you find the information provided useful or solves your problems, help other users find the solution easier by marking my post as an accepted solution. Clicking "yes" on "was this reply helpful" also increases the chances that this solution will help others.
I am a volunteer, offering my knowledge to support fellow users, I do not work for HP nor speak for HP.

Shindy00 · ‎11-15-2021

ill check it out and report findings thanks!

Create an account on the HP Community to personalize your profile and ask a question