-
×InformationWindows update impacting certain printer icons and names. Microsoft is working on a solution.
Click here to learn moreInformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationWindows update impacting certain printer icons and names. Microsoft is working on a solution.
Click here to learn moreInformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Printers
- Printer Paper Jams & Feed Issues
- Re: HP DesignJet T120 Error Possible Media Jam
![Sign in](/html/assets/sign-in-banner.png)
Create an account on the HP Community to personalize your profile and ask a question
03-04-2023 07:57 AM
Hello Community, i have a HP DesignJet T120 printer which on starting always throws a error on Screen with title: Possible Meria Jam and error message “Possible jam, printer cannot continue. Remove jammed paper, review the catridges and printhead are correctly installed. Press ok to continue.” This message pops up whenever i start the printer where i can hear it moves the printhead, roll the paper spindle and then error out. Can you please help?
One possible issue I see is somehow during moving places, we are missing a multisheet tray behind the printer. Can that be an issue? Is there any way, I can bypass that and still use the paper roll as source?
Solved! Go to Solution.
Accepted Solutions
03-04-2023 10:34 AM
You should be able to use this device without the feeder, I suspect you may have an issue with the paper path sensor that is in the paper path on the same side of the plotter as the feeder. It is called the OOPS sensor and it might have been knocked out of position.
I am a volunteer, offering my knowledge to support fellow users, I do not work for HP nor speak for HP.
03-04-2023 10:34 AM
You should be able to use this device without the feeder, I suspect you may have an issue with the paper path sensor that is in the paper path on the same side of the plotter as the feeder. It is called the OOPS sensor and it might have been knocked out of position.
I am a volunteer, offering my knowledge to support fellow users, I do not work for HP nor speak for HP.
03-06-2023 06:08 PM
Thank you very much. That was indeed the issue and it fixed it. Thanks again. Now I am trying to get the roll working as it keeps saying unable to detect paper type but I will try some basic troubleshooting first and then ask a question here again if the problem persists.
Didn't find what you were looking for? Ask the community