Can’t connect my hp deskjet 2600

[Kolay717]

Hi guys I

im having a problem connecting my phone to my printer. I’ve tried everything on YouTube and read a few people have the same problem on here, though when I try to reset it, it won’t work. 
for some reason my on and off button also keeps flashing ? What can I do ? Please help 

[TEJ1602]

@Kolay717, Welcome to HP Support Community!

I see that the printer is in an error state and I appreciate your efforts in trying to resolve the issue.

Follow the steps below-

Reset the printer

Resetting the printer can clear the error state.

1. Turn on the printer, if it is not already on.

2. Wait until the printer is idle and silent before you continue.

3. With the printer turned on, disconnect the power cord from the rear of the printer.

4. Wait at least 10 seconds.

5. Reconnect the power cord to the rear of the printer.

6. Turn on the printer, if it does not automatically turn on.

   The printer might go through a warm-up period. The printer lights might flash, and the carriage might move.

7. Wait until the warm-up period finishes and your printer is idle and silent before you continue.

note:

To make sure the power source functions correctly, make sure the printer is plugged into an electrical outlet and not a power strip or surge suppressor. If the issue persists, try a different electrical outlet.

Try to print.

Also, Update the printer firmware

Download available firmware updates from the HP website

With the printer on and connected to the computer, go to HP Customer Support - Software and Driver Downloads, and then identify your printer. Look for and install any available firmware updates. Refer to the document HP Printers - Updating or Upgrading Printer Firmware

Hope this helps! Keep me posted. 

Please click “Accepted Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!