• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
We have new content about printers, Click here to check it out!
Check some of the most frequent questions about Instant Ink: HP INSTANT INK, HP+ PLANS: INK AND TONER.


Check out our WINDOWS 11 Support Center info about: OPTIMIZATION, KNOWN ISSUES, FAQs AND MORE.
HP Recommended

I got a new router with a new WiFi and can't seem to connect the printer back to my phone, computer or iPad

1 REPLY 1
HP Recommended

@HELPIR,

 

Welcome to HP Support Community,

 

Thank you for posting your query; I’m here to help by guiding you through steps to resolve this issue

 

Refer printer's User manual for printer specific steps.

 

1. Reset the Printer’s Network Settings 

  • Turn off your printer.
  • Press and hold the Wi-Fi button on the printer.
  • While holding the Wi-Fi button, turn the printer back on.
  • Keep holding the Wi-Fi button until the light blinks quickly, indicating that the network settings have been reset.

This clears any old Wi-Fi credentials, allowing you to reconfigure the printer for the new network.

 

2. Reconfigure Printer Wi-Fi Setup

  • Press the Wi-Fi button on the printer again (it should blink rapidly if it’s not already connected).
  • Use the printer’s control panel to reconnect it to your new Wi-Fi.

Alternatively, you can use the HP Smart app or the printer's web-based setup page (accessed via the printer's IP address) to connect the printer to Wi-Fi.

 

3. Check Your Router’s Compatibility

  • Ensure that the Wi-Fi network is using the 2.4 GHz frequency, as the LaserJet P1102W may not be compatible with 5 GHz networks.
  • If your new router is dual band (2.4 GHz and 5 GHz), make sure the printer is connecting to the correct band.

You may also refer these guides: 

I hope these steps help resolve the issue

Please feel free to reply here if you have any questions or if you need further clarification on any of the steps. 

 

Take care and have a good day. 

 

If this reply nailed it, 🔨 mark it as the "Accepted Solution"—it’s like a spotlight for future problem solvers.  And clicking 'yes' under 'Was this reply helpful?' is the cherry 🍒 on top of the solution sundae. Sharing is caring! 💕

 

Regards,

Garp_Senchau
I am an HP Employee

† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.