-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Printers
- Printer Setup, Software & Drivers
- DOWNLOAD UNSUCESSFUL THE PRINTER UPDATE COULD NOT BE D...

Create an account on the HP Community to personalize your profile and ask a question
08-17-2023
07:36 AM
- last edited on
08-17-2023
01:16 PM
by
MayS
I GUESS THERE IS A FIRMWARE UPDATE ,HP IS TRYING TO SEND TO MY PRINTER. IT MAKES MY PRINTER UNUSEABLEAND CONTINUES TO TRY BUT IT MAKES MY PRINT/SCAN JOBS ALL STOP.
CAN YOU CHANGE HOW THE UPDATE GETS TO ME ???
I HAVE TRIED TO WORK THROUGH IT, BUT FOR 3 DAYS NOTHING HAPPENS TO STOP THE DEMAND FROM HP TO KEEP TRYING TO DOWNLOAD SOMETHING.
PLEASE SEND HELP TO [Personal Information Removed]
Thanks, DonaldF [Personal Information Removed]
Solved! Go to Solution.
Accepted Solutions
08-17-2023 07:59 AM
I have had the same problem since 8/15/2023. My only solution was to leave my printer disconnected overnight. Today I powered up my printer and via the HPSmart app I found an option on the HP Easy Start page to stop the auto download of printer updates. I selected the alternate option to be notified of updates. Hopefully this will allow me to regain control of my printer
08-17-2023 07:59 AM
I have had the same problem since 8/15/2023. My only solution was to leave my printer disconnected overnight. Today I powered up my printer and via the HPSmart app I found an option on the HP Easy Start page to stop the auto download of printer updates. I selected the alternate option to be notified of updates. Hopefully this will allow me to regain control of my printer
08-17-2023 12:20 PM
Same problem with a OfficeJet Pro 9018. Started in the last 2 weeks and the printer keeps rebooting (even mid other tasks) then getting stuck in a failed download loop. Resetting the printer and power/boot cycling as suggested in other forum posts did nothing -- this is clearly an issue with the HP Cloud service providing the firmware updates or notifications.
Current Firmware version: MANHTNPP1N002.2313A.00
Please assist as the printer is effectively bricked currently as it auto triggers the update cycles quickly after reboot.
08-17-2023 01:26 PM
The HP Easy Start application can be downloaded from the HP web support page.
This is a problem on HPs side that only they can fix. For now you can disable firmware update attempts with this:
Run the HP Smart application and choose "Printer Settings" which will take you to the embedded web GUI for the printer and then choose "SETTINGS" from the menu at the top.
On the left side click the + next to "Security" and choose "Administrator Settings"
Scroll all the way down to the bottom and uncheck both printer update boxes.
08-19-2023 09:50 AM - edited 08-19-2023 10:12 AM
Unfortunately that is not an option if you use the HP Instant Ink program - you cannot uncheck those options.
HP doesn't post the firmware update to download to apply manually, and the check for the update continues to fail (and has done for several days now) when it tries to check. This puts the printer into an unusable state.
So those of us using Instant Ink are stuck with printers that just go unusable regularly with literally nothing that we can do about it.
I was incorrect. You can change the security settings even if you're on Instant Ink. So the answer from TomAlv is the correct one.
You can also access this by putting your printer's IP address in a web browser to get to the administration and then going to Settings > Security > Administrator Settings - uncheck All Firmware Updates.
08-19-2023 10:14 AM
As an additional note, I was assured by an actually wonderful support rep that this will NOT cause issues with HP Instant Ink at least with an OfficeJet Pro 8035 as it's unlikely there would actually be any new firmware any time soon. But YMMV for your printer as HP Instant Ink does require having the latest firmware always.
08-19-2023 11:47 AM
The screen on the printer won’t let me move on because it says I need to be signed up with the ink program……..I AM ALREADY!!!
I would like to do a reboot of my printer. Is there a solution for that? I feel the need to wipe the set up memory and start fresh! I had an older HP that you could do a manual reboot. If I use the direct connect with the ETHERNET cable, would this work. Right now I am stuck looking at a graphic showing my ink levels.
08-20-2023 03:04 PM
This worked. THANK YOU. This solved our problem. When I signed on to the IP address, went to settings, security, admin settings, and unchecked Updates, shut down printer, unplugged printer, waited a few minutes, replugged in printer, printer came on and problem was gone. Thank you again.