-
1
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
1
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Printers
- Printer Setup, Software & Drivers
- DeskJet 2710: connect only with mobile phone without WIFI

Create an account on the HP Community to personalize your profile and ask a question
01-17-2021 02:34 PM
Hi,
I have a DeskJet 2710, and the seller told me that I can use it also if I don't have a router, but a mobile phone internet connection. I tried and did not get it running.
Do you know if it is possible, and if so, is there a guideline to do it?
Thank you beforehand and best,
Stefan
01-17-2021 09:57 PM
Hi Stefan,
You would need to enable WiFi Direct and connect to the printer's Wi-Fi Direct network, then you may print without a network.
You may follow page 23 on its user guide to enable HP Wi-Fi Direct and print a report to locate its name and password:
http://h10032.www1.hp.com/ctg/Manual/c06611085
You may also follow below support document for instructions about printing with Wi-Fi Direct:
https://support.hp.com/us-en/document/c04577030
Shlomi
Click the Yes button to reply that the response was helpful or to say thanks.
If my post resolve your problem please mark it as an Accepted Solution 🙂
01-23-2021 04:58 AM
Hi,
thank you for your links. That gave a lot more clarity and we made it happen to print.
Nonetheless, its not really an enjoyable, reliable and intuitive experience to print with the phone, because we phase some problems:
- The HP Smart App does not work for the android phone.
- The printing seems to work sometimes (when we have started printer and initiated the connection), but then after the first print job, it does not allow to print anymore.
- Disconnecting and connecting again helps the issue sometimes, but not always.
Have you had some experience with this and can give some advice?
Thanks beforehand and best regards,
Stefan
- Starting it all again usually works, but not all the time