• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
We have new content about printers, Click here to check it out!
Check some of the most frequent questions about Instant Ink: HP INSTANT INK, HP+ PLANS: INK AND TONER.


Check out our WINDOWS 11 Support Center info about: OPTIMIZATION, KNOWN ISSUES, FAQs AND MORE.
HP Recommended
HP DeskJet 4130e All-in-One Printer
Microsoft Windows 10 (64-bit)

HP Deskjet 4100 Orange warning light remains illuminated constantly, is this correct?

3 REPLIES 3
HP Recommended

Hi @TC275,

 

Welcome to the HP Support Community. 

 

I'd like to help!

 

I understand that there are blinking lights on your HP Deskjet F4100 All-in-One Printers.

 

Have tried any hardware changes on the printer?

Did you try changing the cartridges?

 

I suggest you do a Hard Reset

 

(1) Turn the printer on, if it is not already on.
(2) Wait until the printer is idle and silent before you continue.
(3) With the printer turned on, disconnect the power cord from the rear of the printer.
(4) Unplug the power cord from the wall outlet.
(5) Wait at least 60 seconds.
(6) Plug the power cord back into the wall outlet.
NOTE: HP recommends connecting the printer power cord directly to the wall outlet.
(7) Reconnect the power cord to the rear of the printer.
(8) Turn on the printer, if it does not automatically turn on.


The printer might go through a warm-up period. The printer lights might flash, and the carriage might move.
Wait until the warm-up period finishes and your printer is idle and silent before you proceed.

 

You may also refer to this document 

 

Hope this helps! Keep me posted for further assistance.
Please click “Accepted Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!

Nal_NR-Moderator
I am an HP Employee

HP Recommended

Thank you Elohi_NR for your reply.

Unfortunately, your advice has not resolved my problem.

The main thing you misunderstood was the "Orange warning light remains illuminated constantly" as opposed to 'Blinking'.

The question remains "Should the  Orange warning light remains illuminated constantly"

Thanks.

HP Recommended

Hi @TC275,

 

My bad. Are you enrolled in the instant ink program?

 

  • If it is amber is constant, it indicates an HP Instant Ink warning or error. Press the button to print an information page, check the HP Instant Ink section for diagnostic results, and then follow the instructions on the page.

If that is not the issue, This might require one on one interaction to fix the issue

 

I've sent you a private message with further instructions. In order to access your private messages, click the private message icon on the upper right corner of your HP Support Community profile, next to your profile Name or simply click on this link.

 

If the information I've provided was helpful, give us some reinforcement by clicking the Accepted Solution button, that'll help us and others see that we've got the answers!

Nal_NR-Moderator
I am an HP Employee

† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.