HP ENVY 5055 will not print from any device (mac, android, chromebook)

[BenJanzen]

I just bought this and am trying to make it work. I have updated the firmware, I have rebooted it several times. It is discoverable for our MacBook but gives error message. I installed it manually for Chromebook but will not print. It is not discoverable for my Android phone. All these devices are all on the same wifi network with the printer. Help!

[TEJ1602]

@BenJanzen, Welcome to HP Support Community!

Update the printer firmware

Download available firmware updates from the HP website

With the printer on and connected to the computer, go to HP Customer Support - Software and Driver Downloads, and then identify your printer. Look for and install any available firmware updates. Refer to the document HP Printers - Updating or Upgrading Printer Firmware

You may need to instead go into your router settings and try changing the channel manually. Experiment with different channels to see which one works best. You can contact your ISP for help.

To prepare your printer for a wireless connection, restart the printer, computer, and router.

1. Turn the printer off, and then wait 10 seconds.
2. Disconnect the printer power cord from the printer.
3. Turn off the computer or the device you are trying to print from.
4. Connect the printer power cord to the printer, and then turn on the printer.
5. Disconnect the power cord from your wireless router, and then wait 10 seconds.
6. Reconnect the power cord to the router. Wait until Internet service is restored. Internet service is interrupted while the router is off.
7. Turn on the computer.

Reconfigure the network settings on the printer

1. From the home screen of your printer control panel, touch the Wireless icon .

2. Touch the Setup icon .

3. Touch Restore Network Defaults or Restore Network Settings, and then touch Yes to confirm your selection.

4. After the default network settings are restored, touch the back arrow, touch Wireless Settings, and then touch Wireless Setup Wizard.

   The printer searches for available networks.

5. Touch the name of your wireless network.

6. If your wireless network does not display in the list of wireless networks, touch Enter New Network Name, and then type the name of your wireless network.

   NOTE: 

   Type the exact network name, including any uppercase and lowercase letters.

7. Type the WEP or WPA key (network password), and then touch Done.

   If you do not know your network password, go to Find Your Wireless WEP, WPA, WPA2 Password..

   Once the printer connects to the wireless network, the blue Wireless light on the control panel turns on solid.

8. If the printer fails to connect, print a Wireless Network Test Report, and then follow any instructions on the report to troubleshoot wireless connectivity problems. For more information, go to Using a Wireless Network Test Report.

Now, try printing.

Hope this helps! Keep me posted. 

Please click “Accepted Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!