HP ENVY Photo 7855 printer not picking up 4x6 photo paper

[MARodrigues]

Photo tray not working

[Dragon-Fur]

@MARodrigues 

---

@MARodrigues wrote:

Photo tray not working

---

As in "broken"?

If "tray not working" is not a hardware problem,

then it is perhaps an incorrect setting,

or a missing setting,

or maybe the paper is not supported,

or maybe the source is not selected in the software you are using to submit the job to the printer...

Places to check...

If you have not done so, download-save-install the Full Feature Software for the printer

HP Easy Start Printer Setup Software 

About 2/3 of the way through the setup, you will be given the opportunity to select the software - select the "Full" driver set (as opposed to the basic driver).

After the software is installed, Restart the computer and log in.

Next,

Load the paper according to the instructions in the User Guide  - Page 18

Pay attention to the Feed (orientation, flap).

Next,

Tell the printer about the paper - then, if using Windows,

set the Printing Preferences / shortcut

Right after loading the paper...

Tell the printer what you are doing...

Check / Adjust / Retain the Paper at the Printer Display Panel

Note:  This option is not applicable to printers that lack a printer display panel and may not be available on all printer models that do include a printer display panel.

Open Printer Tray,

If you have not yet done so, add desired paper type

Wait a couple of seconds…

Close Tray

IF applicable for your printer:

Look for a message on the Printer Control / Display Panel,

Click Modify (wording varies), set the paper size and type, Click OK

NOTE:  If the size of the Paper Size is not in the Drop-down menu, Select Custom (likely the last selection in the list)

And / Or

Embedded Web Server (EWS)

 Note:  This option is not applicable to printers connected via a USB printer cable (no network connection).

If the printer is on the network,

If the EWS feature is supported on your printer,

Use the Embedded Web Server (EWS) to view / configure your printer.

NOTE:  Laser printer options in EWS are very different from those offered in InkJet Printers.

Open your favorite browser > type / enter Printer IP address into URL / Address bar

Tab Settings > Preferences > Tray and Paper Management

If applicable, check the Advanced section (at the bottom of the Tray and Paper Management menu)

Click Apply to save changes

NOTE:  If the size of the Paper Size is not in the Drop-down menu, Select Custom (likely the last selection in the list)

NOTE:  EWS is also available in HP Smart Windows / Mobile App.

Set the Preferences - Windows

Note: 

Generally, you can Ignore this section when not relevant – for example, when using Word > Mailings > Envelopes

That said, consider:

Make sure the Printing Preferences shortcut is set to "Everyday Printing" or something equally benign.  For example, don't leave the shortcut set to Booklet printing choices or other custom setups that are completely contrary to printing envelopes.

-------------------------------------------------------------------------------------

Check / enable the printer as the “Default Printer”

Settings > Devices > Printers and scanners

UNCHECK (clear box) Let Windows manage my default printer

Select (Left-Click) your printer from the list of printers > Manage > Set as Default

1. Select and adjust settings in each category for the Media (kind of paper), source (tray), and paper size.

Settings > Devices > Printers and scanners

Left-Click on (your) Printer > Manage > Printing Preferences

Next

Tab Printing Shortcuts > Click / Highlight your preferred shortcut > Click Apply > Click OK to exit

NOTE - Make changes to a Shortcut

• Select a shortcut and adjust the settings for paper, source (tray), other settings / Tabs
• Scan Menu for HP Scan >>  If there is a More > section, check / adjust settings in the sub-sections > Click OK to save sub-menu changes
• If supported, save the edited shortcut or use “Save As” or “Create Custom Shortcut” to save as a new / different file name
• Be Aware - not all choices are compatible with all others - for example, paper size and paper type must be compatible else the printer dialog will issue an error message (conflict).
• Click OK to save the setup

============================================================================

What else?

Check the Specifications to make sure the paper is supported for size AND weight.

 Product Specifications for the HP ENVY Photo 7855 All-in-One Printer (K7R96A)

Section Paper Handling

Printer  Home Page - References and Resources – Learn about your Printer  - Solve Problems

 “Things that are your printer”

NOTE:  Content depends on device type and Operating System

Categories:  Alerts, Access to the Print and Scan Doctor (Windows), Warranty Check, HP Drivers / Software / Firmware Updates, How-to Videos, Bulletins/Notices, Lots of How-to Documents, Troubleshooting, User Guides / Manuals, Product Information (Specifications), more

When the website support page opens, Select (as available) a Category > Topic > Subtopic

HP ENVY Photo 7855 All-in-One Printer 

Thank you for participating in the HP Community.

The Community is a separate wing of the HP website - We are not a business group of HP..

Our Community is comprised of volunteers - people who own and use HP devices.

Click Thumbs Up to say Thank You.

Question Resolved / Answered, Click "Accept as Solution" .