HP Envy 5530 printer status unknow

[JimRM]

When I open my printer to print or scan i get the message  "HP Envy 5530 series Printer status unknown", why is this showing this?

[Jay_G24]

 Hi @JimRM,

I'd like to help with the printer connectivity issue-

Try an RPC-

To prepare your printer for a wireless connection, restart the printer, computer, and router.

1. Turn the printer off, and then wait 10 seconds.
2. Disconnect the printer power cord from the printer.
3. Turn off the computer or the device you are trying to print from.
4. Connect the printer power cord to the printer, and then turn on the printer.
5. Disconnect the power cord from your wireless router, and then wait 10 seconds.
6. Reconnect the power cord to the router. Wait until Internet service is restored. Internet service is interrupted while the router is off.
7. Turn on the computer.

If the issue persists try the below steps-

 Use HP Print and Scan Doctor to check connectivity

Download a special version of HP Print and Scan Doctor specifically created to help with printer offline conditions.

1. Download HP Print and Scan Doctor.
2. Run HPPSdr.exe from the download location on your computer.
3. Once HP Print and Scan Doctor opens, click Start, and then select your printer.
   • If your printer in not in the list, turn it off and on, and then click Retry.
   • If there is a connection problem, follow the instructions in HP Print and Scan Doctor.
4. If a screen prompts you to turn on printer updates, click Yes.
5. If a screen prompts you to make your printer the default printer, click Yes.

Set a manual IP-

 -

To set a manual IP and try the steps below -

--->Touch on the wifi icon ((i)) on the printer, and take down the IP address 

--->Open a web browser (ex Chrome or Mozilla) and type in the printer's IP

--->then go to network ---> general ---> network protocols ---> select IPV4 only-->apply 

--->go to wireless ---> wireless 802.11---> select manual ip ---> apply

--->Enter 8.8.8.8 for the first DNS and 8.8.4.4 for the second DNS.  

--->then go to settings on the main ews page --> power management ---> select sleep mode to max 15min

 Connect the printer to TCP/IP port- follow the below instructions-

 --->Touch on the wifi icon ((i)) on the printer, and take down the IP address 

a. Click Start/Devices and Printers.  Right-click on your HP Printer.  Select Printer Properties.  Select the Ports tab at the top.

b.    Select Add Port.  Select Standard TCP/IP Port.  Select New Port.

c.    Follow the Add Port Wizard.  Under Printer Name or IP Address, .  Example:  192.168.1.15.  The IP address will be copied under Port Name.  

d.    Select Next and Finish the Wizard.

Hope this helps! Keep me posted. 

And, Welcome to the HP Support Community. 

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.

Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping