HP Envy Photo Printer

[Rojo2007]

OFFLINE STATUS

HP PRINTER continually goes into OFFLINE Status and always have issues getting it back online

Is this an HP issue, Windows Issue, or Network issue?  Seems the only way to get it back online is

to unplug it and plug it back in.  and this does not always work.  I never use to have this issue.

OFFLINE

[Dragon-Fur]

@Rojo2007 

Welcome to the HP Community --

The source of the problem could be any of what you describe -- commonly, it comes down to the connection type and / or perhaps changes to your network.   Corrupted printer software can result in odd behavior issues, too.

Start here:

Offline Condition

Although the printer appears to be switched on, it does not communicate with other devices on your network.

Consider >> Restart All

Restart Everything, including the router that controls your network

Next,

Offline - Known solutions, presented in the order to be completed / considered

  HP printer is offline or not responding - Windows / Mac  

Section “Advanced Troubleshooting” > Solutions specific to Windows / MacOS / HP Smart (Printer Unavailable)

AND

Troubleshoot a Wi-Fi connection to an HP printer 

Optional - Additional Information / Solutions

Examples

Set the network to defaults and start over.

Use the Embedded Web Server (EWS) to configure the SSID network name.

Consider changing the connection type to TCP/IP.

If the printer is on the network, try installing the Full Feature Software).

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-

Dual Band Network - Considerations

Reminders 

If the printer supports it, connecting using Ethernet is generally a better choice.

Some printers, particularly older models, only support Wireless at 2.4GHz

Some printers support Wireless at both 5GHz and 2.4GHz – but not at the same time

Regardless, if the printer won't work or cannot connect to your 5GHz SSID named network, connect to the 2.4GHz network.

If you are running a Dual Band Network,

 Check that the router is set up to broadcast all frequencies it supports.

Next,

If your router supports it,

On your router:

 Create a separate SSID named network for each frequency supported by the router

 What?  Create one SSID named network for 5GHz and one SSID named network for 2.4GHz

and

 Connect the printer to the SSID network on the frequency / band you want it to use.

In general,

• 2.4GHz is less fussy about obstacles and supports a longer distance (separation) between router and device (printer)
• 5GHz is faster

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

Example – EWS – IPv4

EWS > HP Document / How-to

Use the HP printer Embedded Web Server (EWS)

Ethernet

Open your Browser > Type / enter the Printer IP address into URL / Address bar

Tab Network > Wired (802.3) > IPv4 Configuration

Wireless

Open your Browser > Type / enter the Printer IP address into URL / Address bar

Tab Network > Wireless (802.11) > IPv4 Configuration

As Available:

Tab Network > Wireless (802.11) > Advanced

Network Interface on / off, Network SSID name, Security Settings, Passphrase / Password

Select and connect to the correct SSID / network name for the bandwidth you are using.

Note:   It is not mandatory that you use a manual / static IP address.  Doing so can improve stability.

EWS_9025_Network_IPv4_Configuration_3

Next,

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-

Connection type - TCP/IP

Relevant to Windows

-------------------- --------------------

Method – Add printer using TCP/IP

Please try adding the printer using the printer’s IP address

Find the IP Address of the printer on the Printer Control / Display Panel (touch Wireless button)

Control Panel > icon view Devices and Printers

Click in the top ribbon, Add a Printer

Wait till the menu starts…
Select / Click The printer that I want isn’t listed
Select / Click Add a printer using a TCP/IP address or hostname

Select / Click Next
Device Type > Select in Drop-Down Menu: TCP/IP Device

Hostname or IP Address > Enter the IP Address of the printer

(Skip Port Name)

Select / Click Next

Complete any additional information

-------------------- --------------------

Method - Create TCP IP port (InkJet Printer)

Method - Create / Change-to TCP/IP port

TCP/IP can resolve odd connection, scanning, and installation problems.

Create / Switch to a TCP/IP Port to facilitate communication and prevent ‘offline’ issues

Find the printer's IPv4 address

Print a Configuration Page

OR

Tap on the wireless icon on the Front panel of your Printer to get the IP address

Next,

Windows 11

Settings > Bluetooth & devices > Printers & scanners > Select Printer > Printer Properties

OR
Control Panel > icon view > Devices and Printers > Right-Click the printer > Left-Click Printer Properties

Tab Ports
Click Add Port

Select Standard TCP/IP Port

Select New Port and follow the instructions
Type in the correct IP address for the printer

Example - How-to “Create TCP Port” Contributed by greenturtle

Video: Create & Use TCP IP port
“Note that you can ALWAYS revert back to the original port that the HP software installed by selecting the HP port within the Ports tab (in Printer Properties)”

==========================

1)  Printer - Full Feature Software

================================

 Remove / Install the full driver printer software

If not done by this point...

Restart everything, including the router that controls you network.

Can't stand it?  At least restart the printer and the computer and any device you can stand to be without for a short time.

Next,

Run Windows Updates  --  If any updates are installed, Restart the computer and log in.

Next,

Printer - Full Feature Software - Install

If you have not done so, consider

• HP Full Feature Software / Full Driver printer software - supports printing and scanning from the web, printing in in other software and programs (for example, Word), and provides access to the full range of Printing Preferences / Shortcuts.  The full driver adds at least two shortcuts to the Desktop:  Printer Assistant and HP Scan.  If the printer model includes built-in Fax hardware, the software supports the setup and use of the Fax driver.  No Sign-in required.

If the full driver printer software is (already) installed but not working,

• Uninstall any printer software from Control Panel > icon view > Programs and Features
• Restart the computer and sign in.

What if?

NOTE: If software will not uninstall, appears to be removed and is “still hanging around” after you uninstall / Restart...

Microsoft: Fix problems that block programs from being installed or removed

OR

Revo Uninstaller (Free version)

then

Restart the computer and sign in

Next,

• Check (for the Printer) in Devices and Printers  > If found, Right-Click Printer and Remove -- If any changes are made, that is, you remove anything, Restart the computer and sign in.

Next,

• If using a printer USB cable between the printer and the computer, disconnect the cable before installing the printer software.

• Download and Save the Full Feature Software installation package or the Easy Start Software

Details Page - Driver - For your Printer

>>> Full Feature Software - Web Pack Installation Package - Information - Download / Save / Install  <<<

HP ENVY Photo 7800 All-in-One Print and Scan Driver and Accessories 

Installation

• Open File Explorer
• Navigate to the folder in which you saved the installation file  (likely Downloads)
• Right-Click on the installation package and “Run as Administrator”
• If using a printer USB cable between the printer and the computer, connect the cable when instructed (near the end of the installation).
• After the software is installed, Restart the computer and log in

====================================

Optional – Supported for your printer

Next – HP Universal Scan Software - NOTE:  Model and Operating System version Dependent

 HP Universal Scan Full Feature Software adds OCR libraries to installed HP Scan software. 

HPUS installs a new, full featured, (and separate) HP Scan software shortcut to the Desktop.

Note:  HPUS can be installed as standalone or installed after the full feature printer software.

After the software is installed, Restart the computer and sign in

HP Universal Scan Software provides a larger GUI to make using the software easier on high-resolution screens.   New features have been added to the main menu to help with navigating the settings.

 HP printers - Scan as Editable Text (OCR) with HP Scan (Windows)

====================================

The installation of the full driver adds at least two shortcuts to the Desktop:  

Printer Assistant 

HP Scan

>>> Open the Printer Assistant > tab Scan > Manage Scan to Computer > Enable

Example - Windows - Full Feature Software - Installed in Programs and Features

Programs_and_Features_Printer_Desktop_Icons_11

=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=

References / Resources

HP Printer Home Page - References and Resources

Learn about your Printer - Solve Problems

“Things that are your printer”

When the website support page opens, Select (as available) a Category > Topic > Subtopic

NOTE: Content depends on device type and Operating System

Categories: Alerts, Troubleshooting, Ink & Paper, HP Software / Drivers / Firmware Updates , Setup & User Guides, Product Specifications, Account & Registration, Warranty & Repair

Open

  HP ENVY Photo 7858 All-in-One Printer  

Thank you for participating in the HP Community --

People who own, use, and support HP devices.

Click Yes to say Thank You

Question / Concern Answered, Click my Post "Accept as Solution"